User manual HP GBE2C ETHERNET BLADE SWITCH FOR C-CLASS BLADESYSTEM GBE2C ETHERNET BLADE SWITCH FOR C-CLASS BLADESYSTEM ISCLI REFERENCE GUIDE

[. . . ] HP GbE2c Ethernet Blade Switch for c-Class BladeSystem ISCLI Reference Guide Part number: 437881-002 Second edition: December 2006 Legal notices © 2004, 2006 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] The following table describes the User Security Model Configuration commands. Table 83 User Security Model Configuration commands Command Description Configures a string up to 32 characters long that represents the name of the user. This is the login name that you need in order to access the switch. Command mode: Global configuration Configures the authentication protocol and password. The authentication protocol can be HMAC-MD5-96 or HMAC-SHA-96, or none. When you configure an authentication algorithm, you must provide a password; otherwise you receive an error message during validation. This command allows you to create or change your password for authentication. Command mode: Global configuration Configures the type of privacy protocol and the privacy password. The privacy protocol protects messages from disclosure. The options are des (CBC-DES Symmetric Encryption Protocol) or none. If you specify des as the privacy protocol, then make sure that you have selected one of the authentication protocols (MD5 or HMAC-SHA-96). If you select none as the authentication protocol, you receive an error message. You can create or change the privacy password. Command mode: Global configuration Deletes the USM user entries. Command mode: Global configuration Displays the USM user entries. Command mode: All snmp-server user <1-16> name <1-32 characters> snmp-server user <1-16> authentication-protocol {md5|sha|none} authentication-password <password> snmp-server user <1-16> privacy-protocol {des|none} privacy-password <password> no snmp-server user <1-16> show snmp-server user <1-16> Configuration Commands 89 SNMPv3 View configuration The following table describes the SNMPv3 View Configuration commands. Table 84 SNMPv3 View Configuration commands Command Description Defines the name for a family of view subtrees up to a maximum of 32 characters. Command mode: Global configuration Defines the Object Identifier (OID), a string of maximum 32 characters, which when combined with the corresponding mask defines a family of view subtrees. An example of an OID is 1. 3. 6. 1. 2. 1. 1. 1. 0 Command mode: Global configuration Defines the bit mask, which in combination with the corresponding tree defines a family of view subtrees. The mask can have a maximum of 32 characters. Command mode: Global configuration Selects whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees, which is included in or excluded from the MIB view. Command mode: Global configuration Deletes the vacmViewTreeFamily group entry. [. . . ] Command mode: All except User EXEC show ip igmp groups vlan <1-4094> show ip igmp mrouter clear ip igmp mrouter Uuencode flash dump show flash-dump-uuencode Command mode: All Using this command, dump information is presented in uuencoded format. This format makes it easy to capture the dump information as a file or a string of characters. If you want to capture dump information to a file, set your communication software on your workstation to capture session data prior to issuing the command. This will ensure that you do not lose any information. [. . . ]