User manual HP INTEGRATED LIGHTS-OUT 2 (ILO 2) STANDARD FIRMWARE

[. . . ] HP Integrated Lights-Out 2 User Guide for Firmware 1. 35 Part Number 394326-007 July 2007 (Seventh Edition) © Copyright 2005-2007 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] If you experience repeating characters when using IRC, set Key-Up/Key-Down to Disabled. Boot/Fault Console Capture enables you to capture console video to internal buffers of any boot and fault sequences. Internal buffer space is limited to the capture of the most recent boot or fault · Using iLO 2 88 sequence. The more dynamic and the higher the graphical resolution of the server console, the less amount of data that can be stored in the buffer. Select which type of video to capture using the following options: o Console Capture buffer allows you to select which type of console sequence to capture. You can enable either buffer or enable both buffers at the same time. The buffers share the same internal data area, so enabling both reduces the amount of console video that can be captured. You can change the enabled buffers at any time to maximize buffer utilization. When the buffer configuration is changed, both buffers are reset and information currently in the buffers at that time is lost. Auto Export/Fault Buffer allows you to enable or disable automatically exporting captured console data. o · Export Boot/Fault Buffer enables you to specify the URL location of a web server that accepts a PUT or POST Method data transfer. For example: http://192. 168. 1. 1/images/capture%h%t. ilo transfers the internal-capture buffers to a web server at the IP address 192. 168. 1. 1, and stores the data in the images folder using the filename captureServerNameDateTime-Boot(or Fault). ilo, where: -- %h specifies the addition of the server name to the filename -- %t specifies that a time stamp will be included in the filename -- Boot or Fault is automatically added to denote the buffer type as either a boot-sequence or fault-sequence event For more information about web server configuration, and how to configure an Apache web server to accept exported capture buffers, see the section, "Configuring Apache to accept exported capture buffers (on page 196). " o o o Export enables you to trigger an export manually. Export username is the username for the web server that is specified in the URL. Password is the password of the web server that is specified in the URL. After making changes, click Apply. · · Serial Port Configuration displays the current settings of the system serial ports and the Virtual Serial Port. The Settings for the system and virtual serial ports are also displayed, showing the COM ports in use and IRQ numbers. iLO 2 Virtual Serial Port displays the current status of the Virtual Serial Port connection. The possible modes available are: in use raw mode, or in use normal mode. If the connection is in use, the Disconnect button is available and can be used to disconnect a Virtual Serial Port connection. Raw mode indicates that a client is connected using the WiLODbg. exe utility which is used for remote Windows® kernel debugging. Hot Keys enables you to define keystroke sequences that will be transmitted to the remote host server by pressing a hot key. Remote Console hot keys allow specific key sequences such as Alt+Tab and Alt+SysRq to be passed to the server from the Remote Console JavaTM session. See the section, "Remote Console hot keys (on page 90)" for more information. Java displays the JavaTM requirements for each supported operating system and a link to download JavaTM. For more information, see the section, "Supported browsers and client operating systems (on page 13). " Using iLO 2 89 Remote console hot keys The Program Remote Console Hot Keys page enables you to define up to six multiple key combinations assigned to each hot key. [. . . ] If this attribute is TRUE, members of the role are granted the right. hpqLOMRightConfigureSettings OID Description Syntax Options Remarks 1. 3. 6. 1. 4. 1. 232. 1001. 1. 8. 2. 6 Configure Devices Settings Right for HP Lights-Out Management products. Boolean--1. 3. 6. 1. 4. 1. 1466. 115. 121. 1. 7 Single valued This attribute is only used on ROLE objects. If this attribute is TRUE, members of the role are granted the right. Directory services schema 213 Technical support Software technical support and update service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 HP contact information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]