User manual HP JETDIRECT 625N GIGABIT ETHERNET PRINT SERVER JETDIRECT ADMINISTRATOR'S GUIDE

[. . . ] HP Jetdirect en3700 ew2400 620n Administrator's Guide Administrator's Guide HP Jetdirect Print Servers Models: 620n en3700 ew2400 © 2003-2004 Copyright Hewlett-Packard Development Company, L. P. © 2002 Copyright Hewlett-Packard Company All rights reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice. [. . . ] Valid ports are 3000 to 9000, which are application-dependent. ENWW Using the Embedded Web Server 125 Table 4. 8 Item Miscellaneous Settings (4 of 5) Description For security purposes, two fields allow you to disable services on the printer that use the network. In each field, you must specify the port numbers that are used for network communications with those services. Up to five ports may be specified in each field (for example, [5, 10, 40, 20, 50]). The valid range for port numbers is 1 through 65535. Streams: In this field, enter port numbers of services that pass data streams. Data streams use Transport Control Protocol (TCP) to guarantee data delivery. Datagrams: In this field, enter port numbers of services that pass datagrams. Datagrams, typically used for broadcast messages, use the User Datagram Protocol (UDP), a connectionless protocol where delivery and error recovery are not guaranteed. Disable listening on these ports Enable MFP and AIO software support Enable or disable the print server's support of the full-function scanning facility installed on client computers through software supplied with the HP multifunction device (MFP or All-in-One). If disabled, the print server will not allow client software device functions other than network printing. Support for the print server's Web Scan function is controlled separately. Enable Web Scan Enable or disable use of basic scanning through the print server's embedded Web Scan feature. The use of Web Scan is independent of the setting for enabling MFP and AIO device software support, described above. Enable or disable scan-to-email support. When this parameter is enabled, you can scan-to-email as well as download or display scanned files. The scan-to-email feature is available only when a mail server is specified. Specify the email server using the Email (SMTP) Server parameter described above. Enable Scan-to-email mDNS Service Name Specifies an alphanumeric string of up to 64 ASCII characters assigned to this device or service. This name is persistent and is used to resolve a particular device or service if socket information (such as the IP address) changes from session to session. Apple Rendezvous will display this service. The default service name is the printer model and the LAN Hardware (MAC) address. ENWW Using the Embedded Web Server 126 Table 4. 8 Item Miscellaneous Settings (5 of 5) Description (Read-only parameter) Specifies the mDNS domain name assigned to the device, in the form <host name>. local. If a user-specified host name has not been assigned, the default host name NPIxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. Specifies the mDNS highest priority service to use for printing. To set this parameter, choose one of the following printing options: 9100 Printing: Raw IP printing through HP-proprietary port 9100. IPP Printing: Internet Printing Protocol printing. LPD Printing (RAW): Default LPD raw queue printing. [. . . ] Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl. org. [. . . ]