User manual HP L1530 LCD FLAT PANEL MONITOR

[. . . ] User's Guide L1530 and L1730 Flat Panel Monitors Document Part Number: 335576-B21 July 2003 This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. © 2003 Hewlett-Packard Development Company, L. P. HP, Hewlett Packard, and the Hewlett-Packard logo are trademarks of Hewlett-Packard Company in the U. S. Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated. All other product names mentioned herein may be trademarks of their respective companies. [. . . ] Disconnect and remove the signal and power cables from the back of the monitor. User's Guide 3-7 Setting Up the Monitor 2. Remove the four screws as shown in the following illustration. Removing the Monitor Base CAUTION: Ensure that the bottom of the monitor base is positioned over a table or desktop before removing the base from the monitor. 3. Remove the monitor base from the monitor. 3-8 User's Guide Setting Up the Monitor Mounting the Monitor 1. Refer to "Removing the Monitor Base" steps in the previous section. After the base is removed from the monitor, four threaded mounting holes are exposed on the monitor back panel to be used for mounting purposes. These mounting holes are spaced 75 or 100mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays. 2. Mount the monitor to a swing arm or other mounting fixture by following the instructions included with the mounting fixture to be used. User's Guide 3-9 4 Operating the Monitor Installing the Information Files The CD-ROM included with this monitor contains two information files to be installed onto your computer; an . INF file and an . ICM file. The . INF file defines monitor resources and provides specifications used by most operating systems to install support software for certain hardware devices. The . INF file ensures monitor compatibility and optimization with your computer's graphics adapter. INF files are also downloadable by clicking: http:www. hp. com/go/support and selecting the desired monitor. The . ICM file provides color matching consistency from monitor screen to printer and is activated from within graphics programs that have this feature. To install these files on your computer, insert the Software and Reference Library CD in your computer CD-ROM drive. When the CD menu launches, select "Install INF and ICM Files" and follow the on-screen instructions. User's Guide 4-1 Operating the Monitor Front Panel Components L1530 and L1730 Monitor Components No. Control Speakers Menu button Function Audio feature for music, alarms, etc. (multimedia models only) Launches the On-Screen Display (OSD) menu and selects functions. · When OSD is inactive, press to auto-adjust the screen image. · When OSD is active, press to navigate in reverse through the OSD and adjust OSD scale settings. Controls the volume level of the monitor speakers. 1 2 3 (Minus button) 4 Volume Control 4-2 User's Guide Operating the Monitor No. Control Function When the OSD is active, press to navigate through the OSD and adjust OSD scale settings. When the OSD is inactive, press to select VGA or DVI input. 5 + (Plus button) 6 7 Power LED Power Switch Fully powered = Green. Powers the monitor on and off. Adjusting Monitor Settings Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. If the monitor is not already on, press the Power switch to turn on the monitor. To access the OSD Menu, press the Menu button on the monitor's front panel. User's Guide 4-3 Operating the Monitor 3. To navigate through the OSD Menu, press the + (Plus) button on the monitor's front panel to scroll up, or the ­ (Minus) button to scroll in reverse. [. . . ] For questions regarding your product, contact: Hewlett Packard Company P. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call1 1-800- 652-6672 For questions regarding this FCC declaration, contact: Hewlett Packard Company P. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. C-2 User's Guide Agency Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in brackets are the equivalent international standards): EN55022 (CISPR 22) - Electromagnetic Interference EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) - Electromagnetic Immunity EN61000-3-2 (IEC61000-3-2) ­ Power Line Harmonics EN61000-3-3 (IEC61000-3-3) ­ Power Line Flicker EN60950 (IEC950) - Product Safety Japanese Notice User's Guide C-3 Agency Regulatory Notices Korean Notice EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. [. . . ]