User manual HP L1755 LCD FLAT PANEL MONITOR

[. . . ] User Guide HP L1755 17" & L1955 19" Flat Panel Monitors Document Part Number: 370798-002 January 2005 This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. © Copyright 2005 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U. S. Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation in the U. S. [. . . ] Ensure your system meets the requirements. Download the software by following the instructions. User Guide 4­3 Operating the Monitor Front Panel Controls Front Panel Controls No. Control 1 Auto Adjust Menu Function Activates the auto adjustment feature for optimum image. · If OSD is on, press to navigate backward through the OSD menu features and decrease adjustment levels. · If OSD is off, press to enable the DVI signal input (available on select models) 2 3 ­ (Minus) 4 + (Plus) · If OSD is on, press to navigate forward through the OSD menu features and increase adjustment levels. · If OSD is off, press to enable the VGA signal input. 5 Power Turns the monitor on or off. 4­4 User Guide Operating the Monitor Adjusting Monitor Settings Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. If the monitor is not already on, press the Power switch to turn on the monitor. Press the Menu button on the monitor's front panel to launch the OSD Main Menu. 3. To navigate through the OSD Menu, press the + (Plus) button on the monitor's front panel to scroll up, or the ­ (Minus) button to scroll in reverse. User Guide 4­5 Operating the Monitor 4. To select an item from the OSD Menu, use the + or ­ buttons to scroll to and highlight your selection, then press the Menu button to select that function. Adjust the item using the + or ­ buttons on the front panel to adjust the scale. After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting, then select Exit from the Main Menu. for 10 seconds while displaying If the buttons remain untoucheddiscarded and the settings will a menu, new adjustments will be revert to the previous settings and exit the menu. Using the Sync-on-Green Format If you require use of the sync-on-green video format, you must enable this format through the Main On-Screen Display Menu. Press the Menu button on the front panel of the monitor to activate the Main (Advanced) OSD Menu. Then Exit the OSD Menu. 4­6 User Guide Operating the Monitor Using the On-Screen Display There are two On-Screen Display menus available; one for basic adjustments, and one for advanced adjustments. To access the Basic OSD Menu, press the menu button on the monitor's front panel. Basic OSD Menu Levels Menu Level 1 Brightness Contrast Auto Adjustment Advanced Menu Exit Menu Level 2 Adjustment Scale Adjustment Scale To access the Advanced OSD Menu, press the menu button again, or select Advanced Menu from the Basic OSD Menu. Menu After selecting the Advanced defaultfrom the Basic Menu, the Advanced Menu remains the OSD on subsequent power-ups of the monitor until the Basic Menu is selected or Factory Reset is applied. The Advanced OSD Menu has up to three sublevels and can be viewed in one of seven available languages. The following table provides the menus and their functions at each level: User Guide 4­7 Operating the Monitor Level 1 Brightness Contrast Image Control Advanced OSD Menu Levels Level 2 Level 3 Adjustment Scale Adjustment Scale Auto Adjustment Horizontal Position Vertical Position Sharpness Clock Clock Phase Cancel Save and Return "Adjusting" Message Adjustment Scale Adjustment Scale Adjustment Scale Adjustment Scale Adjustment Scale Factory Preset Y Y Y Y Y Y Y Y Color 9300 K 6500 K Custom Color sRGB Cancel Save and Return Custom Color Adjustment Y Language Deutsch English Espanol Francais Italiano Japanese S. Chinese Cancel Save and Return N Management Power Saver Power On Recall Mode Display On / Off Selection On / Off Selection On / Off Selection N N N 4­8 User Guide Operating the Monitor Advanced OSD Menu Levels (Continued) Level 1 Level 2 Level 3 Factory Preset Power On Status Display Sleep Timer Default Video Input Serial Number Basic Menu Sync-on-Green Cancel Save and Return OSD Control Horizontal OSD Position Vertical OSD Position OSD Timeout Cancel Save and Return Information Factory Reset Exit Yes Yes No Adjustment Scale Adjustment Scale Adjustment Scale N N N On / Off Selection On / Off Selection Timer Set Menu -Analog - VGA Digital - DVI Display monitor s/n N Off N N N User Guide 4­9 Operating the Monitor Adjusting Screen Quality Allow the monitor to warm up for 20 minutes before performing the following procedures. The Auto-adjustment feature automatically fine-tunes the image quality each time a new video mode is utilized. [. . . ] Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call1 1-800- 652-6672 For questions regarding this FCC declaration, contact: Hewlett Packard Company P. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. C­2 User Guide Agency Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in brackets are the equivalent international standards): EN55022 (CISPR 22) - Electromagnetic Interference EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11) - Electromagnetic Immunity EN61000-3-2 (IEC61000-3-2) ­ Power Line Harmonics EN61000-3-3 (IEC61000-3-3) ­ Power Line Flicker EN60950 (IEC950) - Product Safety User Guide C­3 Agency Regulatory Notices Japanese Notice Korean Notice EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency. [. . . ]