User manual HP LASERJET 1005 PRINTER

[. . . ] use hp LaserJet 1005 series HP LaserJet 1005 Series Printer User Guide © Copyright Hewlett-Packard Company 2003 All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. A user of the Hewlett-Packard printer associated with this user guide is granted a license to: a) print hard copies of this user guide for PERSONAL, INTERNAL or COMPANY use subject to the restriction not to sell, re-sell or otherwise distribute the hard copies; and b) place an electronic copy of this user guide on a network server, provided access to the electronic copy is limited to PERSONAL, INTERNAL users of the Hewlett-Packard printer associated with this user guide. Publication number: Q2676-90906 Edition 1, 1/2003 Warranty The information contained in this document is subject to change without notice. [. . . ] See Printer media specifications for more information. Try installing a new HP print cartridge. See Changing the print cartridge for instructions. See Printer properties (driver) for instructions. Click the Paper tab, and make sure that you have selected the appropriate media from the Optimize for drop-down list. Plug the printer directly into an AC outlet instead of into a power strip. Vertical repetitive defects The print cartridge might be damaged. If a repetitive mark occurs at the same spot on the page, install a new HP print cartridge. See Changing the print cartridge for instructions. The internal parts might have toner on them. See Cleaning the printer for more information. If the defects occur on the back of the page, the problem will probably correct itself after a few more printed pages. See Printer properties (driver) for instructions. Click the Paper tab, and make sure that you have selected the appropriate media from the Optimize for drop-down list. Improperly formed characters If characters are improperly formed, producing hollow images, the media stock might be too slick. See Printer media specifications for more information. If characters are improperly formed, producing a wavy effect, the printer might need service. If the characters are improperly formed, contact an HP-authorized dealer or service representative. See Service and support for more information. Page skew Make sure that the media is loaded correctly and the media guides are not too tight or too loose against the media stack. See Loading media into the paper input tray for more information. See Loading media into the paper input tray for more information. See Printer media specifications for more information. 46 Chapter 6 Troubleshooting the printer ENWW Curl or wave Check the media type and quality. Both high temperature and humidity cause media to curl. See Printer media specifications for more information. [. . . ] How does State, Province, or Country/Region Law apply?This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state, province to province, or country/region to country/region. This limited warranty is the sole warranty on the HP print cartridge and supersedes any other warranty relating to this product. IN NO EVENT SHALL HEWLETT-PACKARD COMPANY BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE, OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS WARRANTY OR OTHERWISE. [. . . ]