User manual HP LASERJET 1320

[. . . ] HP LaserJet 1160, 1320, 1320n, 1320tn, 1320nw Use hp LaserJet 1160 and hp LaserJet 1320 series printer User Guide Copyright information © 2004 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. Part number: Q5927-90913 Edition 1, 09/2004 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Print the document using the single-sheet priority input slot (Tray 1). Feed the pages into the slot one at a time. After side one has printed, remove the remaining paper from the input tray, and set it aside until after you finish the manual two-sided print job. Gather the printed pages, and straighten the stack. Turn the printed side down with the top edge toward the printer. Feed the pages into the single-sheet priority input slot (Tray 1) one at a time, starting with the first sheet printed. Mac OS 9 (HP LaserJet 1320 series printer) Note For the HP LaserJet 1320 series printer, two-sided printing is not supported in Mac OS X. If Manual Duplex does not appear as a printer option, perform the following steps: ENWW Printing on both sides of the paper (manual two-sided printing) 63 a. Verify that hp Manual Duplex&Booklet (Classic) was selected when the software driver was installed with the Custom Install option. Do a File-Print, select Plug-In Preferences, and click the right-facing arrow. The right-facing arrow changes to a down-facing arrow, and the hp Manual Duplex&Booklet feature displays. Select Print Time Filters, select hp Manual Duplex&Booklet, and click Save Settings. d. Select Manual Duplex, and select Print on Both Sides. Select Alternate output bin is open (straight through paper path). Print the document using the single-sheet priority input slot (Tray 1). Feed the pages into the slot one at a time. After side one has printed, remove the remaining paper from the input tray, and set it aside until after you finish the manual two-sided print job. Gather the printed pages, and straighten the stack. Turn the printed side down with the top edge toward the printer. Feed the pages into the single-sheet priority input slot (Tray 1) one at a time, starting with the first sheet printed. 64 Chapter 4 Printing tasks ENWW Printing multiple pages on a single sheet of paper (N-up printing) You can select the number of pages that you want to print on a single sheet of paper. If you choose to print more than one page per sheet, the pages appear smaller and are arranged on the sheet in the order that they would otherwise be printed. 1. From your software application, access the printer Properties (or Printing Preferences in Windows 2000 and XP). See Printer Properties (driver) for instructions. [. . . ] Remove the DIMM and reinstall it. Removing a DIMM To remove a DIMM, follow the instructions below: CAUTION Handling a DIMM (memory) without wearing a grounded, antistatic device might damage the DIMM. Touch any metal part of the printer or other grounded metal before touching the DIMM. Turn off the power switch, and unplug the printer. 2. To open the left side panel, gently pull it out. 158 Appendix D HP parts and accessories ENWW 3. [. . . ]