User manual HP LASERJET 2600N

[. . . ] HP Color LaserJet 2600n User Guide HP Color LaserJet 2600n Printer User Guide Copyright and License © 2005 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Insert the printed stack, with the blank side up, and the top edge leading into the device. Print the second side from Tray 2 or optional Tray 3. A 4. Press (SELECT) to continue printing. Print on envelopes and custom media sizes To print on envelopes, complete the following steps. Load no more than 10 envelopes face-up with the flap of the envelope to the right, and the short edge feeding into the device first. Use your computer software program to complete the printing process. NOTE NOTE For Tray 1, load one envelope at a time, face down and the flap to the right. Do not use envelopes with windows or clasps, and do not use envelopes that are wrinkled, nicked, curled, or otherwise damaged. To print on custom media sizes, complete the following steps. Load the media Tray 2 or optional Tray 3 with the narrow side forward and the side to be printed on facing up. Adjust the side and rear media guides to fit the media. 70 Chapter 6 How do I? ENWW 3. At your computer, open a document in a program, such as Microsoft Word. For most programs, click the File menu, and then click Print. In the Print dialog box, click Properties. On the Paper or Quality tab, select the correct media size. NOTE Software settings can override changes to the device properties. Print the document. Change the device print settings, such as print quality, in HP Toolbox To change the default print settings in HP Toolbox, complete the following steps. NOTE The changes that you make to the print settings in HP Toolbox apply to all future print jobs. Open HP Toolbox and click Device Settings. On the Settings tab, you can modify settings that appear on the following pages. Paper Handling Printing Print Quality Print Density Paper type settings Print Modes System Setup Service 4. Click Apply to save the changes that you make on these pages. NOTE If you have similar settings in the printer driver, those settings take priority over the settings that are established in HP Toolbox. Print color documents from my computer in black and white only In the software program, select File, Print, the HP Color LaserJet 2600n print driver, click Properties, click the Color tab, and then select the Print in Grayscale check box. [. . . ] Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka voidaan suorittaa ilman erikoistyökaluja. Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen ollessa toiminnassa. Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för osynlig laserstrålning. [. . . ]