User manual HP LASERJET 3015 ALL-IN-ONE

[. . . ] Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Complete one of the following tasks: On the device control panel, press PHONE BOOK, enter an unprogrammed speed-dial entry, and then press MENU/ENTER. The control panel display notifies you that the speed-dial entry or one-touch key has not been programmed. Enter the fax number, and then press MENU/ENTER. Include pauses, or other needed numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix. (See Using dialing characters for more information. ) Note When entering a fax number, press PAUSE/REDIAL until a comma (, ) appears to insert a pause in the dialing sequence. Press * until W appears if you want the device to wait for a dial tone. Use the alphanumeric buttons to enter a name for the fax number. To do so, repeatedly press the alphanumeric button for the letter that you need until the letter appears. About speed-dial entries, one-touch keys, and group-dial entries If you have more speed-dial entries or one-touch keys to program, repeat steps 1 through 10. If you send information to the same group of people on a regular basis, you can program a group-dial entry to simplify the task. group-dial entries are composed of speed-dial entries. Group-dial entries using numbers 1 through 9 (HP LaserJet 3380 all-in-one) or 1 through 7 (HP LaserJet 3015 all-in-one or HP LaserJet 3030 all-in-one) are also associated with the corresponding one-touch key on the control panel. Any individual speed-dial entry can be added to a group. All group members must have programmed speed-dial entries or one-touch keys assigned to them before being added to the group-dial entry. Use the following instructions to manage your group-dial entries. Note Speed-dial entries, one-touch keys, and group-dial entries are more easily programmed from the software. For instructions about programming speed-dial entries, one-touch keys, and group-dial entries by using the Toolbox, see the electronic User Guide. Assign a speed-dial entry to each fax number that you want in the group. Use the < or the > button to select Fax setup, and then press MENU/ENTER. Use the < or the > button to select Group setup, and then press MENU/ENTER. Use the < or the > button to select Add/Edit group, and then press MENU/ENTER. [. . . ] DSL Digital subscriber line, a technology that enables a high-speed, direct connection to the Internet through telephone lines. The device software can send items to electronic fax programs, which require a modem and fax software. Fax functions Fax-related tasks that are done from the control panel or software that affect only the current job, or are done only once once before returning to the Ready state, such as clearing memory. These functions are in their own section in the control panel menu. [. . . ]