User manual HP LASERJET 3020 ALL-IN-ONE

[. . . ] hp LaserJet 3020 hp LaserJet 3030 use hp LaserJet 3020 all-in-one and hp LaserJet 3030 all-in-one User Guide Copyright Information © 2003 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] In the HP LaserJet Scan dialog box, select Send it to another software application. Click Settings. ENWW Scanning by using hp LaserJet Scan software (Windows) 69 5. On the Other Applications tab, click Browse to locate the program's executable file, which has the file extension ". exe. " You can also type the location of the executable file. Note You can save the settings using the Quick Sets option on the General tab. If you then select the check box after saving a Quick Set, the saved settings will be the default settings the next time you scan to another software program. Select the file type that is supported by this program. Click OK to return to the HP LaserJet Scan dialog box. Note The options that you set in step 5 are for the current job only, unless you save them as a Quick Set. Scanning to the Readiris OCR software 1. Load the originals that are to be scanned face-up in the automatic document feeder (ADF) input tray. Adjust the media guides to hold the originals in place. OR Lift the flatbed scanner lid and load the original that is to be scanned face-down on the flatbed scanner with the top, left corner of the document at the lower-right corner of the glass. On the computer, click Start, select Hewlett-Packard, select hp LaserJet 3030 or hp LaserJet 3020, and then select Scan. HP LaserJet Scan software opens on the computer. Pressing START SCAN to start the HP LaserJet Scan software is not supported when the device is connected to a network. In the HP LaserJet Scan dialog box, select Send it to the Readiris OCR software. Note Readiris must be installed on the computer before the device can scan to the Readiris OCR program. The software CD-ROM that came with the device includes the Readiris OCR program. 70 Chapter 5 Scanning ENWW Scanning from the device and hp Director (Macintosh) The procedures described in this section are for Macintosh OS X. Procedures for Macintosh OS Classic might vary. For more information about tasks and settings described in this section, see the HP Director online Help. For more detailed instructions about loading original documents onto the flatbed scanner or into the automatic document feeder (ADF) input tray, see Loading originals to scan. Scanning to e-mail 1. Load the originals that are to be scanned face-up in the automatic document feeder (ADF) input tray. Adjust the media guides to hold the originals in place. [. . . ] A software screen that is used when working with documents. When the document is loaded into the automatic document feeder (ADF) and the computer is connected directly to the device, the HP Director appears on the computer screen to initiate faxing, copying, or scanning. HP toolbox The HP toolbox is a Web page that opens in a Web browser and provides access to the device management and troubleshooting tools, embedded Web server, and device documentation. link A connection to a program or device that can be used to send information from the device software to other programs, such as e-mail, electronic fax, and OCR links. [. . . ]