User manual HP LASERJET 3100SE

[. . . ] Product User's Guide English Take a look at all HP Support has to offer. Thank you for your purchase. Along with your product, you receive a variety of support services from Hewlett-Packard and our support partners designed to give you the results you need, quickly and professionally. Online Services: for 24hour access to information over your modem, we suggest these services. World Wide Web URL - Printer drivers, updated HP printer software, plus product and support information may be obtained from the following URLs: in the U. S. : http://www. hp. com in Europe: http://www2. hp. com For information specific to the HP LaserJet 3100 product: http://www. hp. com/support/lj3100/ HP Bulletin Board Service - Our electronic download service provides convenient access to HP printer drivers, updated HP printer software, product information, and troubleshooting hints. Set your communications software to N, 8, 1 and use the appropriate number below: Australia: (61) (3) 9890-0276 Denmark: 45 (0)45 991 905 Finland: 358 (0)9 887 221 251 the Netherlands: 31 (0)495 546909 Norway: 47 22 735697 U. S. [. . . ] Use the < and > keys to select Fax Settings and press ENTER/MENU. Press > once to select Outgoing Faxes and press ENTER/MENU. Press > once to select Number of Redials and press ENTER/MENU. Enter the number of times you would like the product to redial. You can choose from 0 (this turns the feature off) to 9. You can choose from 0 (this turns the feature off) to 5. Press STOP/CLEAR to exit the Menu settings. 6 7 152 8 Managing Basic Features EN Adjusting the time between redials If the HP LaserJet 3100 product is set to redial automatically, you can adjust the amount of time it waits between redial attempts. The default is 3 minutes. To adjust the time between redials 1 2 3 4 5 6 7 Press ENTER/MENU. Use the < and > keys to select Fax Settings and press ENTER/MENU. Press > once to select Outgoing Faxes and press ENTER/MENU. Use the < and > keys to select Time Between Redials and press ENTER/MENU. Enter the number of minutes between redials. Press STOP/CLEAR to exit the Menu settings. EN 8 Managing Basic Features 153 Selecting tone or pulse dialing mode Use this procedure to set the HP LaserJet 3100 product to tone or pulse dialing mode. Leave this set to tone unless you know your telephone is not capable of tone dialing. To select tone or pulse dialing 1 2 3 4 5 6 Press ENTER/MENU. Use the < and > keys to select Fax Settings and press ENTER/MENU. Press > once to select Outgoing Faxes and press ENTER/MENU. Press ENTER/MENU to select Dialing Mode. Use the < and > keys to select Tone or Pulse and press ENTER/MENU. Press STOP/CLEAR to exit the Menu settings. Changing detect dial tone Normally, the HP LaserJet 3100 product waits for a dial tone before attempting to dial a fax number. If you are using the HP LaserJet 3100 product with a PBX system and the HP LaserJet 3100 product is not dialing out, the PBX system may be generating an unusual dial tone that the HP LaserJet 3100 product cannot detect. If this is happening, change this setting to Disabled so the HP LaserJet 3100 product will not wait for the dial tone before dialing. To change detect dial tone 1 2 3 4 5 6 Press ENTER/MENU. Use the < and > keys to select Fax Settings and press ENTER/MENU. Press > once to select Outgoing Faxes and press ENTER/MENU. [. . . ] See online help functions that work with 240 labels 106 landscape orientation 97 letterhead 101 menu tree 167 multiple pages per sheet. See online help on both sides 103 on special media 105 one sheet at a time 99 one-touch, speed-dial, and group-dial report 166 options. See online help portrait orientation 97 preprinted paper 101 quality, troubleshooting 215 resolution 238 self-test report 45, 167 speed 239 test page 45 timeout 190 transparencies 106 troubleshooting 203 problems. See troubleshooting 11 Product Stewardship Program 249 programming group-dial codes 146 one-touch keys 144 speed-dial codes 144 properties JetSuite Fax. [. . . ]