User manual HP LASERJET 4000T Quick Reference

[. . . ] HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. Contents Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 To Change a Control Panel Setting . . . . . . . . . . . . . . . . . 1 To Check the Printer's Configuration . . . . . . . . . . . . . . . [. . . ] 2 Press [Item] until PRINT MENU MAP appears. To Print a Configuration Page: 1 Press [Menu] until INFORMATION MENU appears. 2 Press [Item] until PRINT CONFIGURATION appears. 3 Press [Select] to print the configuration page. To Print a PCL or PS Font List: 1 Press [Menu] until INFORMATION MENU appears. 2 Press [Item] until PRINT PCL FONT LIST or PRINT LIST appears. 3 Press [Select] to print the font list. PS FONT EN Control Panel - 2 Common Printer Messages Message ACCESS DENIED MENUS LOCKED Explanation The control panel function you are trying to access has been locked. Load the requested envelope type and size into the envelope feeder. Make sure the envelope size and type are set correctly from the Paper Handling Menu in the control panel. Press [Go] if the desired envelope is already loaded in the feeder. Press [-Value+] to scroll through the available types and sizes. Press [Select] to accept the alternate type or size. ENV FEEDER LOAD [TYPE] [SIZE] MANUALLY FEED [TYPE] [SIZE] Load the requested paper into Tray 1. Press [Go] if the desired paper is already loaded in Tray 1. Press [-Value+] to scroll through the available types and sizes. Press [Select] to accept the alternate type or size. OFFLINE PERFORM PRINTER MAINTENANCE Press [Go] to place the printer online. It is time to perform routine printer maintenance. For more information, see the user's guide for the printer. EN Control Panel - 3 Message TRAY X LOAD [TYPE] [SIZE] Explanation Load the requested paper into the specified tray (X). Ensure that the trays are correctly adjusted for size. The tray type settings (and size for Tray 1) must be set from the printer's control panel. If you are trying to print from the optional 500sheet tray, be sure to set the paper size dial. If you are trying to print A4 or letter size paper, and this message appears, make sure the default paper size is set correctly from the Printing Menu in the printer's control panel. Press [Go] to print from the next available tray. [. . . ] 7. Turn over the stack of paper in the tray. Check the paper (or other print media) type and quality. Make sure paper is loaded correctly and that the guides are not too tight or too loose against the paper stack. Print to a different output bin. 8. [. . . ]