User manual HP LASERJET 5P/MP LASERJET, COLOR LASERJET AND LASERJET MFP AND ALL-IN-ONES - WINDOWS 98, 98 SECO

[. . . ] Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Edition 1, 9/2006 Trademark credits Adobe®, Adobe Photoshop®, Acrobat®, PostScript®, and the Acrobat logo® are trademarks of Adobe Systems Incorporated. EnergyStar® and the Energy Star logo® are US registered marks of the United States Environmental Protection Agency. FireWire® FireWire is a trademark of Apple Computer, Inc. , registered in the U. S. [. . . ] The Output tab is available only when an output device is connected to the HP LaserJet M3027/ M3035 MFP. Properties driver tabs This set of tabs controls the driver behavior and driver connections. To gain access to the Properties tabs, follow these steps: 1. Click Printers (Windows 2000) or Printers and Faxes (Windows XP Professional and Windows Server 2003) or Printers and Other Hardware Devices (Windows XP Home). Click Properties. The following Properties print-driver tabs are available: General Sharing Ports Advanced Security Device Settings About HP drivers for Windows Only device-specific HP driver tabs are described in this document; the other driver tabs are part of the operating system. The following Properties driver tabs are described in this document: Device Settings About 132 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW Help system The HP PCL 6, PCL 5, and PS emulation drivers include a full-featured Help system to provide assistance with printing and configuration options. What's this?Help Windows 2000, Windows XP, and Windows Server 2003 support What's this?Help messages in any of the following ways: Right-click a control and then click What's this?. button in the upper-right corner of the frame, next to the X, to change the cursor to an arrow with a question mark. When you use this special cursor to select a control, the pop-up Help window for that feature appears. Press the F1 key, and the Help window for the currently selected control appears. Context-sensitive Help When you click the Help button on a driver tab or in a dialog box, a context-sensitive Help message appears. Incompatible Print Settings messages Incompatible Print Settings (constraint) messages are unsolicited messages that appear in response to specific print-driver selections. These messages appear in response to selections that are illogical or impossible given the device capabilities or the current settings of other controls. In most cases, the software program and the driver communicate so that the number of copies set in one location (such as the software program) appears in the other (such as the driver). For some software programs, this communication does not take place, and the copies values are treated independently. For example, setting 10 copies in the program and then setting 10 copies in the driver results in 100 copies (10 x 10) being printed. Set the number of copies in the software program, wherever possible. Collated The Collated check box is visible when the Copy Count setting is selected. The check box becomes available and can be changed when the Copy Count setting is greater than 1. When collated, pages print consecutively for each copy of the document. When not collated, copies of each page print together. This setting is not synchronized with the collate setting in the software program Print dialog box. Settings in the software program override settings in the print driver. For instance, when using Microsoft Word, the Collate check box in the Print dialog box is selected by default. However, in the print driver, the Collated check box on the Advanced tab is not selected by default. [. . . ] The parameter (-o l) consists of a lowercase "O", not a zero, and a lowercase "L", not the numeral 1. This parameter sets the transport protocol to binary mode. The file prints, but no messages appear in the command prompt window. Type exit at the command prompt to close the command window. 2. 290 Chapter 7 Engineering Details ENWW Media attributes Topics: Media sources and destinations Media-source commands Driver-supported media sizes Driver-supported media types Media-type commands Media sources and destinations The following table indicates the standard and optional media sources and destinations for the HP LaserJet M3027/M3035 MFP. Table 7-5 HP LaserJet M3027/M3035 MFP ­ Media sources and destinations Media sources 100-sheet multipurpose tray (tray 1) 500-sheet paper tray 2 500-sheet paper tray 3 Media destinations 250-sheet top bin 250-sheet rear bin (straight paper path) Standard Standard Optional Standard Optional for the HP LaserJet M3035 MFP and the HP LaserJet M3027 MFP; standard for the HP LaserJet M3035xs MFP Standard on the HP LaserJet M3035xs MFP HP 20-Sheet Convenience Stapler Media-source commands The PCL 6 attribute for paper source is ubyte # MediaSource or ubyte_array "string" MediaSource. [. . . ]