User manual HP LASERJET 8100

[. . . ] HP LaserJet MFP Upgrade Kit for HP LaserJet 8000 and 8100 Printers (C4166A) Contents How to navigate Index User Guide Use of this electronic document indicates that you accept the Copyright and License terms. Copyright 2002 Hewlett-Packard Company 2 Copyright and License Copyright Hewlett-Packard Company 2002 All Right Reserved. Except as allowed by copyright laws or herein, reproduction, adaptation, or translation without prior written permission is prohibited. A user of an HP LaserJet 8000 or 8100 printer is granted a license to: a) print hard copies of this Upgrade Kit User Guide for PERSONAL, INTERNAL or COMPANY use subject to the restriction not to sell, re-sell or otherwise distribute the hard copies; and b) place an electronic copy of this user guide on a network server provided access to the electronic copy is limited to PERSONAL, INTERNAL users of the LaserJet 8000 or 8100 printer. Reorder part Number C4166-60001 Second Edition, February 2002 Warranty The information contained in this document is subject to change without notice. [. . . ] When a selection is made, the Size and Type will update automatically. Note If you choose a paper type that is not already loaded in the printer, the printer will prompt you to load Tray 1 with the correct paper before the job is printed. HP Digital Copy Operating Instructions Chapter 1 HP Digital Copy 48 Menu Tabs (continued) reduce/enlarge tab Allows you to enlarge or shrink the size of the document. Allows you to choose the paper size for your original document and specify a different size for the copy. You may also specify the output paper size and then choose a scaling percent to reduce or enlarge a region of the source document. You may choose to copy a full-bleed page onto the printable region of the output paper. You are presented with the following controls for selecting the desired paper scaling percent: Reduce/Enlarge - Shows input-to-output paper sizes. When a size is selected, the proper scaling percent for the currently selected input and output paper sizes is displayed. Percent - Shows the current page scaling percent. HP Digital Copy Operating Instructions Chapter 1 HP Digital Copy 49 Menu Tabs (continued) reduce/enlarge tab (continued) Custom Media Reduction - This setting allows you to switch between the standard/enlargement settings and the custom mode. This allows you to choose your original and copy document sizes independently. When the Custom Media Reduction box is checked, you can select a paper size under the Original list for your original document and then select the paper size in the Copy list for the size you want to copy. The percent text box automatically calculates page scaling percent. When the Custom Media Reduction box is unchecked, you may select from a list of standard reduction or enlargement settings, such as Letter (LTR) to Legal (LGL). Also, you may select the Manual setting in order to adjust the scaling percent by hand. When Manual is selected you may increase or decrease the scaling percent by one percent increments. You may reduce a document by up to 25 percent or enlarge a document by up to 200 percent. When you have chosen Manual, you may also choose the size of your original document. The copier will reduce that document by the percent you have selected. HP Digital Copy Operating Instructions Chapter 1 HP Digital Copy 50 Menu Tabs (continued) reduce/enlarge tab (continued) Shrink Page to Printable Region - This setting allows you to adjust the page scaling percent. This allows you to copy a full-bleed page onto the printable region of the currently selected output paper size. There are limits to how far out to the edge of the page the printer can print. If you are copying a page that has printing all the way out to the edges (full bleed), then checking this box will cause the image to be reduced slightly so that the entire edge-toedge image may print within the printable region of the output paper. HP Digital Copy Operating Instructions Chapter 1 HP Digital Copy 51 Menu Tabs (continued) 2-sided/N-up tab This tab has four controls for setting up the options and a preview image that graphically illustrates the current settings. 2-sided Copying - Shows the currently selected 2-sided mode. The preview image will update to display your choice. [. . . ] A problem occurred with the backside optical system. This error might require service to correct. A problem occurred with the frontside optical system. A mechanical problem occurred. Check to make sure that the shipping lock has been removed and reinserted properly. HP Digital Copy Problem Solving Chapter 1 HP Digital Copy 76 HP Digital Copy Warranty For warranty information, see the user guide supplied with your specific HP LaserJet printer. HP Digital Copy Warranty Chapter 2 HP Digital Sender Module 77 2 HP Digital Sender Module Overview The HP Digital Sender Module includes the HP Digital Copy and a Windows NT ® server or workstation that is running the HP Digital Sender Module Service. [. . . ]