User manual HP LASERJET 8100N Reference Guide

[. . . ] Ready Reference Guide English HP LaserJet 8100, 8100 N, and 8100 DN Printers Ready Reference Guide HP LaserJet 8100, 8100 N, and 8100 DN Printers © Copyright Hewlett-Packard Company 1998 All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Publication number C4214-90921 Reorder number C4214-99001 First Edition, October 1998 Warranty The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with respect to this information. [. . . ] If you do not load the specified tray, the printer will continue printing from the next available tray, and the message will continue to display. Load the requested paper into the specified tray (X). Ensure that the trays are correctly adjusted for size. The tray type settings (and size for Tray 1) must be set from the printer's control panel. If you are trying to print A4 or letter size paper, and this message appears, make sure the default paper size is set correctly from the Printing Menu in the printer's control panel. Press Go to print from the next available tray. Press - Value + to scroll through the available types and sizes. Press Select to accept the alternate type or size. OFFLINE PERFORM PRINTER MAINTENANCE TRAY x EMPTY TRAY x LOAD [TYPE] [SIZE] EN Control Panel - 4 Message 13. x PAPER JAM [LOCATION] Explanation Remove jammed paper from the specified location. Open and close the top cover to clear the message. If the message persists after all jams have been cleared, a sensor may be stuck or broken. Contact an HP-authorized service or support provider. (See the HP Support pages in the online user guide for the printer. ) The paper size you are trying to print is not the same as the control panel setting for Tray 1. Reload the tray with the correct paper size. Make sure that the control panel setting for Tray 1 or the Envelope Feeder is correctly adjusted for size. (The printer will continue trying to print the job until size settings are correct. ) After performing the actions above, press Go twice. The page containing the error will automatically be reprinted. (Or, you might want to press Cancel Job to clear the job from the printer's memory. ) 41. 3 UNEXPECTED PAPER SIZE 50. x FUSER ERROR An internal error has occurred. Turn the printer off, and then turn the printer on. The message might clear, and then reappear when the next print job is sent. If this message persists, contact an HP-authorized service or support provider. 51. x or 52. x PRINTER ERROR A temporary printing error occurred. Turn the printer off, and then turn the printer on. [. . . ] 7. Turn over the stack of paper in the tray. Check the paper (or other print media) type and quality. Make sure paper is loaded correctly and that the guides are not too tight or too loose against the paper stack. Print to a different output bin. 8. [. . . ]