User manual HP LASERJET 8150

[. . . ] HP LaserJet 8150, 8150 N, 8150 DN, 8150 HN, and 8150 MFP Printers Contents How to navigate Index User Guide Use of this electronic document indicates that you accept the Copyright and License terms. Copyright 2001 Hewlett-Packard Company 2 Copyright and License Copyright Hewlett-Packard Company 2001 All Rights Reserved. Except as allowed by copyright laws or herein, reproduction, adaptation, or translation without prior written permission is prohibited. A user of the Hewlett-Packard printer associated with this user guide is granted a license to: a) print hard copies of this user guide for PERSONAL, INTERNAL or COMPANY use subject to the restriction not to sell, re-sell or otherwise distribute the hard copies; and b) place an electronic copy of this user guide on a network server provided access to the electronic copy is limited to PERSONAL, INTERNAL users of the Hewlett-Packard printer associated with this user guide. [. . . ] (See the product label next to the power receptacle on the back of the printer for voltage requirements. ) Blank or Garbled Control Panel Display Situation Printer is not turned on. Printer is turned on but internal fans are not running. Solution Put the printer's power switch in the on position. Make sure the line voltage is correct for the printer's power configuration. (See the plate next to the power receptacle on the back of your printer for voltage requirements. ) If you are using a power strip and its voltage is not within specification, plug the printer directly into the power receptacle. Correcting Output Quality Problems Chapter 5 Problem Solving 265 Blank or Garbled Control Panel Display (continued) Situation Display is blank and internal fans are not running. Printer display is in the wrong language or displays unfamiliar characters. Solution Make sure that the printer power is on. Press all the keys to see if one is stuck; contact your HP service representative if this does not work. Reconfigure the control panel display language. See the getting started guide, or press and hold SELECT while simultaneously pushing the power switch ON. Hold SELECT until SELECT LANGUAGE appears, then release SELECT. Use the VALUE - and VALUE + keys to select the desired language. The control panel display will indicate the printer is ready to use. If the new language does not appear in the display, you may not have pressed SELECT to save your new selection. Correcting Output Quality Problems Chapter 5 Problem Solving 266 Printer Cannot Print Configuration Page Situation Correct size of paper is not loaded. Toner cartridge sealing tape is not removed. Solution Check paper trays to be sure the correct sizes are loaded (Letter or A4). Also, check that guides are set correctly. Remove sealing tape from toner cartridge. See the printer's getting started guide or the installation guide that came with the toner cartridge. Load paper, see instructions starting on page 89. Paper tray is out of paper. A printer cover is open. Firmly close the printer top cover and all doors (left, front, and right). Check for paper jams, see instructions starting on page 202. Paper is jammed in the printer. [. . . ] 2) This Device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3) The HP LaserJet 8150 MFP, or any model of HP LaserJet 8150 printer with an HP Digital Copy attached, complies with Class A limits. Declaration of Conformity Appendix E Regulatory Information 507 4) The product includes Local Area Network (LAN) options. When the Interface Cable is attached to either of the IEEE 802. 3 connectors, the printer meets the requirements of EN 55022 Class A. [. . . ]