User manual HP LASERJET 9050

[. . . ] HP LaserJet 9040/9050 User Guide hp LaserJet 9040/9050 series printers User Guide Copyright and License © 2005 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Turn the printer off and reinstall the duplex printing accessory. The optional tray is not connected properly to the printer. Turn the printer off and reinstall the optional tray. Optional Tray 1 is not connected properly to the printer. Turn the printer off and reinstall optional Tray 1. Empty the bin to continue printing. The printer is cancelling a job. The message continues while the job is stopped, the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded. The compact flash card in the specified slot is not working correctly. CARD SLOT X NOT FUNCTIONAL For help press CARTRIDGE FAILURE For help press alternates with Return for Replacement Checking paper path CHOSEN PERSONALITY NOT AVAILABLE To continue press alternates with For help press Cartridge is loaded and the shipping protection strip cannot be fully removed. (See the HP support flyer or go to www. hp. com/support/lj9050_lj9040. ) The engine is rotating its rollers to check for possible paper jams. A print job requested a printer language (personality) that does is not available with this printer. The job will not print and will be cleared from memory. Print the job using a driver for a different printer language, or add the requested language to the printer (if available). ENWW Resolving control-panel messages 119 Message Cleaning. . . Do not power off alternates with For help press CLOSE RIGHT DOOR To continue turn off then on alternates with CLOSE RIGHT DOOR For help press Creating. . . CLEANING PAGE DATA RECEIVED To print last page press Deleting. . . DIFFERENT PAPER SIZES IN JOB Explanation or recommended action The printer is processing the cleaning page. The hard disk or compact flash disk is being cleaned. Contact your network administrator. The right door is open and must be closed for printing to continue. The printer is generating the cleaning page. The printer has received data but is waiting for a form feed or is in the Pause state. The printer is deleting a stored job. Different paper sizes are used for a single job in the multifunction finisher. Verify that all pages in the job are configured for the same size paper. Reinsert the duplexer. DUPLEXER ERROR REMOVE DUPLEXER Install duplexer with power off EIO X DISK NOT FUNCTIONAL For help press The EIO hard disk is not working correctly. Remove the EIO hard disk from the slot (a slot number will replace the X) indicated. If the message continues, replace the disk with a new EIO hard disk. Event log empty The user is attempting to view an empty event log by selecting SHOW EVENT LOG from the control panel. The external device might not be able to perform the finishing process, but it could still pass paper. [. . . ] Right-click in the table of contents, and then click Close All. Right-click in the table of contents, and then click Customize Description Opens all books or folders in the table of contents. This command only works if the Contents tab is displayed. This command only works if the Contents tab is displayed. [. . . ]