User manual HP LASERJET IID PRINTER LASERJET, COLOR LASERJET AND LASERJET MFP AND ALL-IN-ONES - WINDOWS 98, 98 SECO

[. . . ] Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Part number: CB425-90926 Edition 1, 10/2006 Trademark Credits Adobe®, Acrobat®, and PostScript® are trademarks of Adobe Systems Incorporated. Microsoft®, Windows®, and Windows NT® are U. S. [. . . ] The default setting for automatic copy collation is On. Touch Collate. ENWW Change the copy-collation setting 125 Copy photos and books Copy a photo NOTE Photos should be copied from the flatbed scanner, not from the document feeder. Lift the lid and place the photo on the flatbed scanner with the picture-side down and the upperleft corner of the photo in the upper-left corner of the glass. Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the upper-left corner of the glass. Gently press down on the lid to press the book to the flatbed scanner surface. Touch Start Copy. 126 Chapter 7 Copy ENWW Combine copy jobs by using Job Build Use the Job Build feature to build a single copy job from multiple scans. You can use either the document feeder or the scanner glass. The settings for the first scan are used for subsequent scans. If necessary, select the desired copy options. After each page is scanned, the control panel prompts you for more pages. If the job contains more pages, load the next page, and then touch Start Copy. NOTE If you need to change the LDAP settings, you must change them by using the embedded Web server. For more information, see Embedded Web server, or see the Embedded Web Server User Guide on the device CD. Configure e-mail server settings Consult your system administrator to find the IP address for the SMTP server. Or, find the IP address from the device control panel (see ). Then use the following procedures to manually configure and test the IP address. From the Home screen, touch Administration. Touch E-mail Setup, and then touch SMTP Gateway. Type the SMTP gateway address, either as an IP address or as a fully qualified domain name. If you do not know the IP address or domain name, contact the network administrator. Touch OK. 130 Chapter 8 Scan and send to e-mail ENWW Test the SMTP settings 1. From the Home screen, touch Administration. Touch E-mail Setup, and then touch Test Send Gateways. [. . . ] NOTE If you installed a printer language (personality), check the "Installed Personalities and Options" section on the configuration page. This area should list the new printer language. 2. 3. 266 Appendix E Working with memory and print server cards ENWW Save resources (permanent resources) Utilities or jobs that you download to the device sometimes include resources (for example, fonts, macros, or patterns). Resources that are internally marked as permanent remain in the device memory until you turn the device power off. [. . . ]