User manual HP LASERJET IIISI PRINTER LASERJET, COLOR LASERJET AND LASERJET MFP AND ALL-IN-ONES - WINDOWS 98, 98 SECO

[. . . ] These tests were run to determine how HP scanners and All-in-One printers and their associated TWAIN drivers performed using the scan-related feature tests that Citrix uses to test its Presentation Server and Presentation Server client software. This document explains the scan tests performed by Citrix, identifies which HP scanners and All-in-One printers and TWAIN driver versions were used, and describes any issues that occurred while performing these tests. HP also screens all driver releases to verify that the drivers are free of memory leaks and memory allocation issues. hP has selected a combination of LaserJet , Business Inkjet , and Deskjet printers for Citrix to test that serve as a representative test sample for all printers in the HP printer family. [. . . ] This issue occurs when an HP PCL driver (version 4. When Citrix autocreates using an older HP driver, the process halts and any remaining printers fail to autocreate. Driver settings, such as tray configuration, duplexer, printer memory, and quick sets are not read at autocreation. Paper size and orientation are the only client settings that are read during autocreation. 0 and the client must be a 32-bit Windows client with at least ICA version 9. The settings will be saved to the user's profile when the user logs out. printer settings will be restored the next time the user logs in. This feature is available in environments running MetaFrame XP with Feature Release 1 and Service Pack 1 or greater. With any of the following HP print drivers: BIJ1100, DJ450, CP1700, DJ9600, DJ9300, CP1160, the user logs in for the first time and printing functions correctly. When the user logs off and logs back in again, printing is no longer functional. HP does not recommend the use of "host-based" printers in Citrix environments. Drivers for the printers were downloaded from the HP Driver Support website. The network print server was imported into the Citrix Presentation Server farm, and the availability of shared printers was verified. A printer policy was then created for Session printers and a User filter created for the Session printer policy for domain users, allowing domain users logged on to the Presentation server farm to verify that the shared network printer was available in the client session, and that the client could print successfully. Known issues with network print server and HP printers and drivers No issues were discovered when testing the Citrix Presentation Server Import Network Server feature using the HP LaserJet/Business Inkjet/Designjet/Deskjet printers and drivers listed above. Description Policies are used to apply Citrix Presentation Server settings for client device mapping, for example, to specific users, clients, and servers. policies override similar settings configured farm-wide at the server level or on the client. Description Citrix Presentation Server allows client printers (printers that are locally connected to client devices) to be automatically created for DOS and WinCE Clients. Autocreation makes these printers available for printing from remote applications that are run in Citrix Presentation Server sessions. Test methodology An HP printer was attached to the client system running DOS using a parallel cable. The printer driver was installed on the Citrix Presentation Server, and drivers for the printers were downloaded from the HP Driver Support website. the DOS client connected to the Citrix server farm and the creation of the DOS client printer was verified. [. . . ] After you install drivers, use the driver replication feature in the Management Console for Citrix Presentation Server to copy the driver files and registry settings to other servers in the server farm. Use the replication feature to save time when you install printer drivers, and to ensure that all drivers are available on all servers where Citrix Presentation Server clients need them. Replicating printer drivers in the server farm ensures that the Presentation Server client users can print to the client and network printers in the farm. Test methodology HP LaserJet/Business Inkjet/Designjet/Deskjet printers were attached to a Citrix Presentation Server using parallel cables, USB cables or were installed by creating a TCP/IP port and connecting to the printer using JetDirect. [. . . ]