User manual HP LASERJET P2015X

[. . . ] HP LaserJet P2015 Series User Guide HP LaserJet P2015 Series User Guide Copyright information © 2006 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. Part number: CB366-90951 Edition 1, 09/2006 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] When you select RESTORE MODES, all of the modes are reset to the factory settings. NOTE You must click Apply to save your changes. ENWW HP ToolboxFX 51 System setup Use the HP ToolboxFX system settings options to configure miscellaneous print settings. NOTE You must click Apply to save your changes. Service During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. HP ToolboxFX provides an easy method for cleaning the paper path. For more information, see Clean the printer media path. Print settings The HP ToolboxFX Print Settings tab contains links to the following main pages: Printing. Change the default print settings, such as number of copies and paper orientation. View and change the HP postscript level 3 emulation settings. Printing Use the HP ToolboxFX printing settings options to configure the settings for all print functions. NOTE You must click Apply to save your changes. PCL 5e Use the PCL 5e options to configure the settings when you are using the PCL 5e print personality. NOTE You must click Apply to save your changes. PCL 6 Use the PCL 6 printer driver to take full advantage of all printer features. Unless complete backward compatibility with previous PCL drivers or older printers is necessary, the PCL 6 driver is recommended. NOTE You must click Apply to save your changes. 52 Chapter 6 Managing and maintenance ENWW PostScript Use the PostScript option when you are using the HP postscript level 3 emulation print personality. When the Print PostScript Errors option is turned on, the HP postscript level 3 emulation error page automatically prints when HP postscript level 3 emulation errors occur. NOTE You must click Apply to save your changes. Network settings The network administrator can use the HP ToolboxFX Network Settings folder to control the networkrelated settings for the printer when it is connected to a TCP/IP-based network. The following options are available: IP Configuration Advanced SNMP Network Summary ENWW HP ToolboxFX 53 Embedded Web server The embedded Web server allows you to view printer and network status and to manage printing functions from your computer instead of from the printer control panel. Below are examples of what you can do using the embedded Web server: View printer status information View and print internal pages Determine the remaining life on all supplies and order new ones Set the size and type of media loaded in each tray View and change tray configurations View and change the printer default configuration settings View and change network configuration The embedded Web server provides the same functions as the Advanced Printer Settings section of the HP ToolboxFX. The main differences between using the embedded Web server and using the HP ToolboxFX are the following: You do not need to install any software on the computer. You only need to use one of these supported Web browsers: Internet Explorer 6. 0 (and later) Netscape Navigator 7. 0 (and later) Firefox 1. 0 (and later) Mozilla 1. 6 (and later) Opera 7. 0 (and later) Safari 1. 2 (and later) Konqueror 3. 2 (and later) The embedded Web server is available in sixteen languages. The embedded Web server does not provide e-mail or status alerts. The embedded Web server works when the printer is connected to an TCP/IP-based network. The embedded Web server does not support IPX-based printer connections. NOTE You do not have to have Internet access to open and use the embedded Web server. However, if you click a link on any of the pages, you must have Internet access in order to go to the site associated with the link. Open the embedded Web server To open the embedded Web server, type the IP address or hostname of the printer in the address field of a supported Web browser. [. . . ] You may not copy the Software onto any public network. You may not disassemble or decompile the Software unless HP's prior written consent is obtained. In some jurisdictions, HP's consent may not be required for limited disassembly or decompilation. Upon request, you will provide HP with reasonably detailed information regarding any disassembly or decompilation. [. . . ]