User manual HP LASERJET PRO 500 MFP M525F

[. . . ] LASERJET ENTERPRISE 500 MFP User Guide 2 M525 HP LaserJet Enterprise 500 MFP M525 User Guide Copyright and License © 2012 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Open the following menus: ● ● ● ● 3. Fax Settings Fax Send Settings Fax Send Setup Fax Setup Wizard Follow the steps in the Fax Setup Wizard to configure the required settings. Fax setup is complete. 146 Chapter 8 Fax ENWW NOTE: The settings configured using the Fax Setup Wizard on the control panel override any settings made in the HP Embedded Web Server. NOTE: If the Fax Settings menu does not appear in the menu listing, LAN or internet fax might be enabled. When LAN or internet fax is enabled, the analog fax accessory is disabled and the Fax Settings menu does not display. Only one fax feature, either LAN fax, analog fax, or internet fax, can be enabled at a time. If you want to use analog fax when LAN fax is enabled, use the HP MFP Digital Sending Software Configuration Utility or the HP Embedded Web Server to disable LAN fax. Set or verify the date and time The date and time setting for the fax accessory is the same value as the product date and time setting. Use the Fax Setup Wizard to provide this information, or follow these steps: 1. From the Home screen on the product control panel, scroll to and touch the Administration button. Open the following menus: ● ● ● 3. General Settings Date/Time Settings Date/Time Touch the correct Time Zone setting for your locale. Touch the Month drop-down menu and select a month. Touch the boxes next to the Date drop-down menu to enter the day and year from the keypad. Touch the boxes below the Time heading to enter the hour and minutes from the keypad, and then touch the AM or PM button. Touch the Adjust for Daylight Savings feature, if necessary. Touch the Save button to save the settings. Set or verify the date/time format The date and time format setting for the fax accessory is in the same format as the product date and time setting. Use the Fax Setup Wizard to provide this information, or follow these steps: 1. From the Home screen on the product control panel, scroll to and touch the Administration button. Open the following menus: ● ● ● 3. General Settings Date/Time Settings Date/Time Format Touch a Date Format option. ENWW Configure required fax settings 147 4. Touch the Save button to save the settings. 148 Chapter 8 Fax ENWW Configure fax dialing settings 1. From the Home screen on the product control panel, scroll to and touch the Administration button. [. . . ] Open the print queue and restart the print job. Another product with the same or similar name might have received your print job. Print a configuration page to check the product name. Verify that the name on the configuration page matches the product name in the Print & Fax or the Print & Scan list. When connected with a USB cable, the product does not appear in the Print & Fax or the Print & Scan list after the driver is selected Software troubleshooting ▲ Make sure that your Mac operating system is Mac OS X 10. 5 or later. Hardware troubleshooting 1. [. . . ]