User manual HP LASERJET PRO M203DN

[. . . ] Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Print a configuration page to determine the IP address or host name. Press and hold the Resume Release the Resume button until the Ready light begins blinking. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. Rename the printer on a network To rename the printer on a network so that it can be uniquely identified, use the HP Embedded Web Server. Print a configuration page to determine the IP address or host name. Press and hold the Resume Release the Resume button until the Ready light begins blinking. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. NOTE: If the web browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer. On the Device Information page, the default printer name is in the Device Description field. You can change this name to uniquely identify this printer. Completing the other fields on this page is optional. Click the Apply button to save the changes. Manually configure IPv4 TCP/IP parameters Use the EWS to manually set an IPv4 address, subnet mask, and default gateway. Print a configuration page to determine the IP address or host name. Press and hold the Resume Release the Resume button until the Ready light begins blinking. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer configuration page. Press the Enter key on the computer keyboard. [. . . ] Make sure that the network cable is not connected. To verify if the network has lost communication, try connecting other devices to the network. For Windows, click Start, click Run, type cmd, and then press Enter. For OS X, go to Applications, then Utilities, and open Terminal. [. . . ]