User manual HP LC2640N

[. . . ] HP LC3040N 30" HD Ready LCD TV HP LC2640N 26" HD Ready LCD TV User's Guide The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO ANY MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT OR SERVICE TO YOU. [. . . ] To use the remote control: 1 Press the TV, CBL/SAT, DVD/VCR, or HP. PC button to select the home entertainment component (Set-top-box, DVD/VCR or HP MCPC) to control. 2 Aim the remote control at the remote control sensor of the selected home entertainment component, and then press the button you want to use. 30º 5m Using the TV 19 Remote control item Indicator light Description The red light blinks once each time a button is pushed. If the red light blinks two times when a button is pushed, the remote control batteries are low and need replacement. Use the SETUP button when programming the remote control for component control. Press PWR once to turn on or off the selected home entertainment component. Press one of these buttons once to select a home entertainment component to control. HP. PC selects the HP Media Center PC (connected to the VGA or DVI connector) and enables the HP MCPC special buttons on the remote. To program the remote control to operate a cable or satellite settop-box, or a DVD, or a VCR, see "Programming the remote control for component control" on page 22. Use the keypad (0­9, +10) to directly select channels. Press MUTE once to turn sound off or on. Use VOL+ (or VOL­) to raise (or lower) the sound volume. RTN (channel return) once to recall the last channel or to page back one screen in the main menu. Press HP. MC to Start Media Center when using the HP Media Center PC. Use CH+ (or CH­) to select the next higher (or lower) channel. Use GUIDE to display the program guide for a TV set-top-box or for HP MCPC. Use EXIT to exit out of the selected component's menu or guide. Use these cursor buttons to move the cursor in a program guide or in menus. Press ENTER once after entering channel numbers on some TV models. Use Enter as the OK button for the HP MCPC. Use Enter to bring up the OSD. Setup PWR TV, CBL/SAT, DVD/VCR, or HP. PC Keypad Mute VOL CH. RTN HP. MC CH Guide Exit/Back Up/down/left/right buttons Enter 20 Using the TV Remote control item Info/Display Description Use INFO to display current channel and program information, if available. Use Display to show you which channel you are on. Menu PIP Size/Fast reverse Press MENU to access the HP MCPC menu. [. . . ] Brings a new tier of realism to sporting events and movies. Reproduces film-originated content from video sources with superior accuracy. Greatly enhances purity of standard definition and off air media video. Identifies areas of fine detail in a picture, such as skin and hair, and enhances them to a dramatically more life like appearance. [. . . ]