User manual HP M-HA-FABRIC MANAGER SOFTWARE

[. . . ] user guide hp StorageWorks embedded web server Product Version: FW V05. 01. 00-24/HAFM SW V07. 01. 00-09 Second Edition (June 2003) Part Number: AA-RTDRB-TE This guide describes the Embedded Web Server (EWS) and its features. It tells you how to use EWS to configure, operate, and monitor Storage Area Networks (SANs). © Copyright 2001-2003 Hewlett-Packard Development Company, L. P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] The ports cannot accept a login from an attached device and cannot connect to other switches. You can configure this state through the Online State tab view (See to Setting Product Online or Offline on page 105 for instructions). All unblocked ports are able to connect with devices. You can configure this state through the Set Online State tab view (See to Setting Product Online or Offline on page 105 for instructions). Note that the product automatically goes online after a power-up, an initial machine load (IML), or initial program load (IPL). Online Name -- The user-defined name or description assigned to the product. Front View and Rear View -- Using this graphical view of the product, you can view status symbols and simulated light emitting diode (LED) indicators, display data, or use mouse functions to monitor status and obtain vital product information for the product and its hardware components. Move the cursor over parts of the graphics to display labels identifying each hardware component or port and its slot position in the chassis. Choose a port to view the corresponding Port Properties tab for the port. Choose an FRU to view the FRU Properties tab for the FRU. Colored indicators reflect the status of actual LEDs on the product's components. Table 5 describes the port operational states and the LED and attention indicators that display on the Switch or Director page. Embedded Web Server User Guide 73 Viewing Product and Fabric Data Table 5: Status Indicators View Front LED Name System Power System Error Light (SEL) Color Green Amber Behavior Off when the LAN is down. Off when the SEL on the hardware is off. When this indicator illuminates, an event has occurred requiring immediate attention, such as a system, fan, power supply, or port failure. Off when port status is anything but Online. Green when port status is Online and the operating speed is 1 Gbps. Blue when port status is Online and the operating speed is 2 Gbps (Edge Switch 2/24 only). Off when port status is anything but Failed or Service Required. On when port status is Failed or Service Required. On when FRU status is Failed. Port Online Green/Blue Port Service Required Amber Rear FRU Service Required Amber 74 Embedded Web Server User Guide Viewing Product and Fabric Data Viewing Port Properties To view the properties of a port on a product, perform the following procedure: 1. The Port Properties tab view displays (Figure 24) showing the properties for only one port. Figure 24: Port Properties tab view 3. To display properties for a specific port, insert the port's number in the Port Number field and click the Get Port Properties button. (You can also use the <<Back and Fwd>> buttons to view port information incrementally, one at a time. ) The Port Properties page provides the following information: Port Number -- The physical port number. [. . . ] The Open trunking threshold must be in the range 0­99. Make sure all values are valid and resubmit the request. This command is not valid for the S/390 environment (FICON management style in HAFM). Make sure Enterprise Fabric mode is not enabled and the switch is offline. [. . . ]