User manual HP MCDATA 4GB SAN SWITCH FOR P-CLASS BLADESYSTEM

[. . . ] HP StorageWorks HA-Fabric Manager user guide FW 08. 01. 00/HAFM SW 08. 08. 00 Part number: AA-RS2CG-TE Sixth edition: December 2005 Legal and notice information © Copyright 2001­2005 Hewlett-Packard Development Company, L. P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. [. . . ] 11. Click to the right of the Zones list to add the selected zones to the zone sets. 12. To activate the zone set, see "Activating a zone set" on page 152. 13. Click OK. Adding a member to a zone To add a new or existing member to a zone: 1. See "Displaying the zone library" on page 149. Select the zones to which you want to add members from the Zones list. To add an existing member, skip to step 7. To create a new member, click New Member. 150 Zoning The Add Zone Member dialog box is displayed (Figure 92). Figure 92 Add Zone Member dialog box 5. Specify a zone member by its domain and port ID or WWN address. NOTE: Zoning by domain and port is supported only in Homogeneous Fabric interop mode. Do one of the following: · Select Domain/Port and enter the domain and port IDs in the appropriate boxes. · Select WWN and enter the WWN address. NOTE: If you select an invalid domain/port value or WWN address and then activate the zone set, the application shows a zoning mismatch message after the next discovery pass. The Zoning dialog box is displayed (Figure 91 on page 149). Select an option from the Zoning Method list. Select the members to add to the zone from the Potential Zone Members list. To add all ports on a device, select the device. Click to the right of the Potential Zone Members list to add the selected members to the zone. NOTE: If you click Cancel or the close button (X), without clicking OK, only the changes that you made to the active zone set are saved. Creating a zone set To create a new zone set: 1. See "Displaying the zone library" on page 149. The Zoning dialog box is displayed (Figure 91 on page 149). See "Zoning naming conventions" on page 148. Press Enter. HA-Fabric Manager user guide 151 5. Select the zones you want to add to the zone set from the Zones list. [. . . ] NOTE: Setting large zones through Telnet can take a long time for large zone sets--approximately six seconds for each zone set. Windows systems 1. Open the Install_Home\bin\HAFM_sc. bat file using a text editor. Find the following lines and add the bold text with one space before and after the text: rem HAFM Server start %JAVA_HOME%\bin\HAFMServer. exe -server -Xmx512m -Xminf. 15 -Xmaxf. 35 -classpath %CLASSPATH% -Dsmp. Mp. max=512 -Dsmp. autodiscovery=false -Dsmp. mpi. test -Dsmp. deployment. prefix=Server/ -Dsmp. zoning=legacy -Dsmp. zoning. wait. timeout=180000 -Dsmp. webServer -Dsmp. flavor=%APP_FLAVOR% Server 3. Edit the -Dsmp. zoning. wait. timeout entry. [. . . ]