User manual HP MV2010

[. . . ] HP Media Vault User's Guide Revision C Copyright The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] If you' re finished modifying Shared Folders, click Accept or Cancel. Otherwise continue with the next section. (If you click Cancel, your changes will not be accepted. ) To change file access settings: Before changing the default access mode from Network Computers, see Supported protocols in How to use the Shared Folders screen. Complete one or more of the following steps: Click Network Computers (CIFS). Select either Read-only access or Full Access. Your media vault automatically defaults to Full Access. Select either Read-only access or Full Access. Your media vault automatically defaults to Full Access. Select either Read-only access or Full Access. Click FTP. Select either Read-only access or Full Access. 2. If you' re finished modifying Shared Folders, click Accept or Cancel. Otherwise continue with the next section. (If you click Cancel, your changes will not be accepted. ) To modify a user's access privileges: 1. Select a user from the Select Username drop-down list. Select a privilege level from the Select Privilege Level drop-down list. Repeat steps 1 through 3 for each username and privilege level you want to modify. If you' re finished modifying Shared Folders, click Accept or Cancel. Otherwise continue with the next section. (If you click Cancel, your changes will not be accepted. ) To create new users 1. Click Create New User When you click Create New User, you are taken to the User Settings page. Enter the username in the User's Name dialog box. Enter a password name in the Password dialog box. [. . . ] After you contact the HP Technical Support Center and the fault diagnosis identifies that the problem can be fixed using one of these parts, a replaceable part can be sent directly to you. Once the part arrives, replace the defective part pursuant to the provided instructions and documentation. If further assistance is required, call the HP Technical Support Center, and a technician will assist you over the phone. In cases where the replacement part must be returned to HP, you must ship the defective part back to HP within a defined period of time, normally thirty (30) days. [. . . ]