User manual HP OFFICEJET 4110 Reference Guide

[. . . ] hp officejet 4100 series all-in-one reference guide © Copyright Hewlett-Packard Company 2003 All rights are reserved. No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. This product incorporates Adobe's PDF technology, which contains an implementation of LZW licensed under U. S. Adobe and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. [. . . ] ­ Fax Log, which prints a log of the last 30 fax transactions. ­ Speed Dial List, which prints a list of programmed speed dials. ­ Self-Test Report, which prints a report to assist you in diagnosing print and alignment problems. For more information, see print a self-test report on page 32. ­ Automatic Reports Setup, which is the automatic reports setting described in generate reports automatically on page 22. When you reach the report that you want, press Enter. 3 control resolution and contrast Your HP Officejet lets you change the resolution and contrast of documents that you are sending. change resolution Resolution affects the transmission speed and quality of faxed documents. 22 hp officejet 4100 series use the fax features to change the resolution from the front panel 1 2 3 4 5 6 7 Load your originals in the ADF. Enter the fax number using the keypad, or press Speed Dial until the desired speed-dial entry appears. Press Fax to scroll through the fax options. Stop scrolling when you reach the Resolution menu. Press until the desired resolution quality appears (Standard, Photo, Fine, Very Fine). Your HP Officejet only faxes at the highest resolution supported by the receiving fax. If you choose Photo, be aware that the faxing process takes longer to complete. When faxing photographs, we recommend that you choose Photo. change contrast Change this setting if you want a black-and-white fax to be darker or lighter than the original. to change the fax contrast from the front panel 1 2 3 4 5 6 7 Load your originals in the ADF. Enter the fax number using the keypad, or press Speed Dial until the desired speed-dial entry appears. Press Fax to scroll through the fax options. Stop scrolling when you reach the Lighter/Darker menu. The range of values appears as a circle on a scale on the display. Press to lighten the fax or to darken it. The circle moves left or right as you press a button. Press Enter to accept the setting you selected. change other fax settings redial a number automatically You can set your HP Officejet to redial a busy and an unanswered number automatically. If you initiated a fax from the computer, the computer must be left on for the redialing process to work correctly. [. . . ] For any hardware Product, the use of a non-HP print cartridge or a refilled print cartridge does not affect either the warranty to the Customer or any HP support contract with the Customer. However, if Product failure or damage is attributable to the use of a non-HP or refilled print cartridge, HP shall charge its standard labor and materials charges to service the Product for the failure or damage. If HP receives, during the applicable warranty period, notice of a defect in any Product, HP shall either repair or replace the defective Product, at HP's option. Where labor charges are not covered by HP's limited warranty, repairs shall be at HP's standard charges for labor. [. . . ]