User manual HP OFFICEJET OFFICEJET LX

[. . . ] R HP OfficeJet Family Technical Support Solutions Guide Contents Subject Chapter 1: Product Information Introduction . Chapter 2: Installation and Configuration Introduction . Installing the HP OfficeJet LX Software . Running the Eclipse FAX SE from the HP OfficeJet LX Manager . [. . . ] You may send a fax while printing, if desired. Received faxes will be stored in memory, then printed when your print job is complete. However, if you are waiting for the last page of your print job at the time you see this message, press Load/Eject to eject the last page. If you want to be able to print received faxes, make copies, or print reports from the menu: Load Letter-, A4-, or Legal-size paper into the paper tray. Wait until the memory-stored fax has been sent before sending a fax from the fax loading tray. Remove the document from the fax loading tray, straighten the stack, and reload it. If you don't want to wait while each page is ejected, open the control panel and remove the document yourself. Press Start/Copy to begin printing the report. Wait for a few seconds for this message to clear before using the HP OfficeJet. If a "SYSTEM ERROR" message is displayed that advises you to call for service, record the 3-digit error number before calling. Printing. Waiting for data The printer has paused to wait for further print data. Ready Out of fax paper Either there is no paper loaded in the paper tray, or the wrong size paper is loaded for printing received faxes, making copies, or printing reports from the menu. You tried to send a fax from the fax loading tray while a memory-stored fax was waiting to redial (sending to a group or sending a delayed fax). The HP OfficeJet was unable to load the document you placed into the fax loading tray. A document is being ejected from the fax loading tray after you cancelled a fax or a copy, or after the power was lost during scanning. You pressed the Stop button while a report was being printed. The HP OfficeJet stored an automatic report in memory while the paper tray was empty. Each time the power is turned on, the HP OfficeJet tests itself to make sure it's in good working order. If it finds a problem, an error message will be displayed. Redial pending Try again later Remove document and reload Removing document Report cancelled Report in memory press START Self test (Please wait) (Continued on next page) Problem Resolution 5-13 Display Messages (Continued) Store fax now?1=Yes 2=No While scheduling a fax, you are prompted to decide whether to 1) store the document in memory for sending later, or 2) place the document in the fax loading tray until the designated start time. All settings are returned to the factory defaults. If you want to store the fax in memory until the start time, press 1. If you don't want to use up the memory, or if you don't think your document will fit into memory, press 2 and place your document in the fax loading tray before the start time. You can continue to use the HP OfficeJet (LX) but the battery may be discharged. [. . . ] The list of customer available resources for technical assistance is found in chapter ________ of the TSSG. Part numbers of orderable supplies and accessories are found in: A. Chapter 6 of the TSSG Chapter 5 of the TSSG Chapter 1 of the TSSG Chapter 3 of the TSSG Final Exam-3 14. A delayed send fax from the automatic document feeder can be sent while a print job is printing? [. . . ]