User manual HP OFFICEJET T45XI

[. . . ] No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Notice The information contained in this document is subject to change without notice. Hewlett-Packard shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. This product may contain remanufactered parts that have been fully tested to meet 100% of original performance specifications. [. . . ] if Yes , press 1 and the first speed dial code appears. If you want to add it to the group, press Enter (or use the arrow keys to scroll to a number you want to add; press Enter to add it). The first assigned speed dial code appears on the display. Press Enter to delete it, or use the arrow keys to scroll to an entry you want to delete; press Enter to delete it. Menu, 4, 4 Print Speed Dial List prints a list of your speed dial codes and (for T65 models) a template of one-touch codes to attach beside your one-touch buttons. Fax Header enters your name and fax number on the fax header. Menu, 5, 3 Rings to Answer sets the the number of rings your HP OfficeJet will detect before answering (the Auto Answer light must be lit). If you connect an answering machine to the HP OfficeJet, we suggest you set the answering machine to answer on the fourth ring and the HP OfficeJet on the sixth. Menu, 5, 4 Paper Size enables you to set the size of paper in the paper tray. Use this feature to set as default the fax color/resolution setting you will use most frequently. You can then change this setting temporarily by pressing Color/Resolution on the front panel. Standard Color: Fastest color faxing Fine Color: Highest quality color faxing 300 DPI Black: Best quality for text, but slower sending speed Photo Black: Best quality for photos and graphics; slowest speed Standard Black: Fastest black and white faxing for text Fine Black: Good all-around quality and sending speed for text The first three settings are black and white only. Your HP OfficeJet will only fax at the highest resolution supported by the receiving fax machine. Menu, 5, 8 PBX applies in some areas only and may not appear in your menu. Answer Ring Pattern should only be changed if your telephone line has more than one assigned number, each with its own distinctive ring pattern. This is a service provided by some telephone companies. If you do not have this service, set this feature to All Rings. If you connect the HP OfficeJet to a line with distinctive ringing, have your telephone company assign one ring pattern to voice calls and another to fax calls (double or triple rings are best for a fax number). Then follow these steps: 2 Press Auto Answer until the green light appears. 3 If you have an answering machine on this line (on any number), Now your HP OfficeJet will automatically answer the fax call pattern. Menu, 6, 3 Busy Redial sets the HP OfficeJet to automatically redial at intervals after a busy signal. Note: To immediately redial the last fax number you entered on the HP OfficeJet keypad, press Redial/Pause. [. . . ] Information on the countries for which HP has obtained regulatory telecom approval can be obtained from each specific product model User's Guide. If a product needing support is used in a country for which HP has not obtained regulatory telecom approval but in which it is legal to purchase the product, HP will provide support as indicated above, but will not provide support for problems that may arise in using the non-approved country's telecom network. If a product needing support is being used in a country for which HP has not obtained regulatory telecom approval and in which it is illegal to purchase the product, HP will not honor the warranty and will not provide support for the product. To the extent allowed by local law, the remedies provided in this Warranty Statement are the customer's sole and exclusive remedies. [. . . ]