User manual HP OFFICEJET 6500

[. . . ] OFFICEJET 6500 User Guide Podrcznik uytkownika E709 HP Officejet 6500 (E709) All-in-One Series User Guide Copyright information © 2009 Copyright Hewlett-Packard Development Company, L. P. 9. Use only the external power adaptor/ battery provided with the device. Hewlett-Packard Company notices The information contained in this document is subject to change without notice. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Disconnect the USB wireless setup cable when prompted. To set up wireless communication using the installer (Mac OS X) 1. Connect a USB wireless setup cable to the port on the back of the HP device and then to any USB port on the computer. Double-click the HP Installer icon on the Starter CD, and then follow the onscreen instructions. Disconnect the USB wireless setup cable when prompted. To set up wireless communication using the device control panel with wireless setup wizard The Wireless Setup Wizard provides an easy way to set up and manage a wireless connection to your device. NOTE: To use this method, you must have a wireless network set up and running. Set up the device hardware (see the getting started guide or the setup poster that came with your device). On the device control panel, press the Setup button. Press an arrow button to move to Network Settings, and then press OK. Press an arrow button to move to Wireless Setup Wizard, and then press OK. Follow the display instructions to complete the setup. To turn off wireless communication Device control panel: Press Setup, then select Network Setup, then select Wireless Radio, and then select either On or Off. Set up the device for wireless communication (some models only) 137 Chapter 8 Connect the device using an ad hoc wireless network connection Method 1 1. Turn on wireless in your computer and in the device. On your computer, connect to the network name (SSID) "hpsetup". (This network name is the default, ad hoc network created by the HP device. ) NOTE: If your HP device was previously configured for a different network, you can restore the network defaults to enable the device to use "hpsetup". To restore the network defaults complete the following steps: Reset the administrator password and network settings: Select Setup, select Network, and then select Restore Network Defaults. For more information, see General troubleshooting tips and resources. Guidelines for reducing interference on a wireless network The following tips will help reduce the chances for interference in a wireless network: · Keep the wireless devices away from large metal objects, such as filing cabinets, and other electromagnetic devices, such as microwaves and cordless telephones, as these objects can disrupt radio signals. Keep the wireless devices away from large masonry structures and other building structures as these objects can absorb radio waves and lower signal strength. For an infrastructure network, position the WAP in a central location in line of sight with the wireless devices on the network. Keep all wireless devices on the network within range of one another. · · · Configure your firewall to work with HP devices A personal firewall, which is security software running on your computer, can block network communication between your HP device and your computer. If you are having problems such as: · · · · Printer not found when installing HP software Unable to print, print job stuck in queue or printer goes offline Scan communication errors or scanner busy messages Unable to see printer status on your computer The firewall might be preventing your HP device from notifying computers on your network where it can be found. If the HP software cannot find the HP device during installation (and you know the HP device is on the network), or you have already successfully installed HP software and experience problems, try the following: 1. If you are using a computer running Windows, in the firewall configuration utility, look for an option to trust computers on the local subnet (sometimes called the "scope" or "zone"). By trusting all computers on the local subnet, computers and devices in your office can communicate with each other while still being protected from the internet. [. . . ] Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Third-party licenses 277 Appendix D 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSLToolkit. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. [. . . ]