User manual HP OFFICEJET PRO

[. . . ] Edition 2, 2/2009 Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] The connection status of your computer should change to Not Connected. From the menu that appears, you can determine if the AirPort is turned on and which wireless network your computer is connected to. NOTE: For more detailed information about your AirPort connection, click System Preferences in the Dock, and then click Network. If the wireless connection is working correctly, a green dot appears next to AirPort in the list of connections. for more information , click the Help button in the window. If you are unable to get your computer connected to your network, contact the person who set up your network or the router manufacturer as there might be a hardware issue with either your router or computer. If you are able to access the Internet and are using a computer running Windows, you can also access the HP Network Assistant at http://www. Make sure that the HP Officejet/ Officejet Pro device is connected to your network If your device is not connected to the same network as your computer, you will not be able to use the HP device over the network. Follow the steps described in this section to find out if your device is actively connected to the correct network. If the HP Officejet/Officejet Pro device supports Ethernet networking and is connected to an Ethernet network, check the two Ethernet indicator lights on the top and bottom of the Ethernet port on the back of the HP device. the lights indicate the following: · Top light: If the light is lit solid green, the HP device is connected to the network, and communications have been established. If the light is off, there is no network connection. ⷠBottom light: If the yellow light flashes, data is being sent or received by the HP device over the network. For more information, see "Configure your firewall to work with HP devices" on page 12. If you are able to access the EWS but are still unable to use the HP device even with the firewall turned off, try enabling the firewall software to recognize the HP device. For more information, see "Configure your firewall to work with HP devices" on page 12. If you still encounter problems after configuring the firewall, go to sections 4 and 5. Make sure the HP Officejet/Officejet Pro device is online and ready If you have the HP software installed, you can check the HP device's status from your computer to see if the device is paused or offline, preventing you from using it. If the printers on your computer are not being displayed in Details view, click the View menu, and then click Details. If you install the software again, the installer might create a second version of the printer driver in your Printers or Printers and Faxes folder. If you have difficulties printing or connecting to the HP device, make sure the correct version of the printer driver is set as the default. On the Ports tab, look for a port in the list with a checkmark. [. . . ] HP does not warrant that the operation of any product will be interrupted or error free. HP's limited warranty covers only those defects that arise as a result of normal use of the product, and does not cover any other problems, including those that arise as a result of: a. improper maintenance or modification; b. Software, media, parts, or supplies not provided or supported by HP; c. [. . . ]