User manual HP OFFICEJET PRO 6830

[. . . ] HP Officejet Pro 6830 HP Officejet Pro 6830 User Guide Copyright information © 2014 Copyright Hewlett-Packard Development Company, L. P. Edition 1, 7/2014 Hewlett-Packard Company notices The information contained in this document is subject to change without notice. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Use only the replacement cartridges that have the same cartridge number as the ink cartridge you are replacing. You can find the cartridge number in the following places: ● ● ● ● ● In the embedded web server, by clicking the Tools tab, and then, under Product Information clicking Ink Gauge. For more information, see Embedded web server. On the printer status report (see Printer status report). On the label of the ink cartridge you are replacing. Open the ink cartridge access door to locate the sticker. In the printer software, click Shop, and then click Shop For Supplies Online. The Setup ink cartridge that comes with the printer is not available for separate purchase. NOTE: Store printing supplies ● ● Keep all ink cartridges in the original sealed packages until they are needed. Ink cartridges can be left in the printer for extended periods of time. However, to assure optimal ink cartridge health, be sure to turn off the printer properly. For more information, see Turn the printer off. Store ink cartridges at room temperature (15-35° C or 59-95° F). ● Anonymous usage information storage The HP cartridges used with this printer contain a memory chip that assists in the operation of the printer. In addition, this memory chip stores a limited set of anonymous information about the usage of the printer, which might include the following: the number of pages printed using the cartridge, the page coverage, frequency of printing, and the printing modes used. This information helps HP design future printers to meet our customers' printing needs. The data collected from the cartridge memory chip does not contain information that can be used to identify a customer or user of the cartridge or their printer. HP collects a sampling of the memory chips from cartridges returned to HP's free return and recycling program (HP Planet Partners: www. hp. com/recycle). The memory chips from this sampling are read and studied in order to improve future HP printers. HP partners who assist in recycling this cartridge might have access to this data, as well. Any third party possessing the cartridge might have access to the anonymous information on the memory chip. If you prefer to not allow access to this information, you can render the chip inoperable. However, after you render the memory chip inoperable, the cartridge cannot be used in an HP printer. If you are concerned about providing this anonymous information, you can make this information inaccessible by turning off the memory chip's ability to collect the printer's usage information. ENWW Order ink cartridges 69 To disable the usage information function 1. [. . . ] If it is not satisfactory, running the printhead cleaning procedure from the toolbox might improve it. Paper too short The paper loaded is shorter than the minimum requirement. Paper that meets the printer requirements must be loaded. For more information, see Recommended papers for printing and Load paper. Ink cartridge incorrectly installed The ink cartridge indicated in the message is not installed correctly. Make sure all of the ink cartridges are properly installed: 1. [. . . ]