User manual HP OFFICEJET PRO 8615

[. . . ] HP Officejet Pro 8610 e-All-in-One/HP Officejet Pro 8620 e-All-in-One/HP Officejet Pro 8630 e-All-in-One User Guide Copyright information © 2014 Copyright Hewlett-Packard Development Company, L. P. Edition 1, 4/2014 Hewlett-Packard Company notices The information contained in this document is subject to change without notice. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] ● ● ● Set up Web Services using the printer control panel Set up Web Services using the embedded web server Set up Web Services using the HP printer software Set up Web Services using the printer control panel The printer control panel provides an easy way to set up and manage Web Services. To set up Web Services, complete the following steps: 1. Make sure the printer is connected to the Internet using either an Ethernet or wireless connection. From the printer control panel, touch (print apps) or (HP ePrint). Touch Yes to accept the Web Services terms of use and enable Web Services. In the Auto Update screen, touch Yes to allow the printer to automatically check for and install product updates. NOTE: If a printer update is available, the printer will download and install the update, and then restart. You will have to repeat the instructions from step 1 to set up HP ePrint. NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your network administrator or the person who set up the network. 5. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup. Set up Web Services using the embedded web server You can use the printer's embedded web server (EWS) to set up and manage Web Services. To set up Web Services, complete the following steps: 1. For more information, see Embedded web server on page 118. In the Web Services Settings section, click Setup, click Continue, and follow the on-screen instructions to accept the terms of use. If prompted, choose to allow the printer to check for and install printer updates. NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts. Repeat the instructions from step 1 to set up HP ePrint. ENWW Set up Web Services 89 NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your network administrator or the person who set up the network. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup. Set up Web Services using the HP printer software If you did not set up Web Services when you installed the HP software on your computer, you can still use the software to set up Web Services. For more information, see Open the HP printer software (Windows) on page 37. In the HP printer software, select ePrint Setup under Print, Scan & Fax. In the Web Services Settings section, click Setup, click Continue, and follow the on-screen instructions to accept the terms of use. [. . . ] This could be caused by the cartridge, or the sensor may have failed. If the sensor has failed, it can no longer sense when your cartridges are out of ink. Printing with an empty cartridge will cause air to enter the ink system, which causes poor print quality. Significant amounts of ink will be used up to recover from this condition, which will deplete much of the ink supply for all cartridges. [. . . ]