User manual HP OMNIBOOK 5500

[. . . ] HP OmniBook Getting Started 1 Notice This manual and any examples contained herein are provided "as is" and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein. Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations shall not apply to Consumer transactions in Australia and the United Kingdom and shall not affect the statutory rights of Consumers. [. . . ] Do not interrupt the recovery process or unplug the ac adapter until recovery is completed. To make DOS 6. 22 and Windows for Workgroups backup disks When you set up the Windows for Workgroups operating system, you should have been prompted to create a set of backup disks for Windows for Workgroups and DOS 6. 22. If you did not make backup disks, you can do so now with the following procedure. From the OmniBook group, double-click Make Backup Installation Disks. Follow the instructions on the screen. 23 Starting Out with Your OmniBook Restoring Files To recover HP software programs 1. If you have an internal CD-ROM drive , install it in the OmniBook. ­or­ If you have a SCSI CD-ROM drive and a docking system CD-ROM drive to the docking system. ­or­ If you have a PCMCIA or parallel port CD-ROM drive , connect the PCMCIA or parallel port CD-ROM drive. See "To set up a PCMCIA or parallel port CD-ROM drive. " 2. Insert the Recovery CD in the CD-ROM drive. From the \OMNIBOOK\HPUTILS\DISK1 directory on the CD, double-click SETUP. EXE. The OmniBook Application Software Setup menu appears. Click the HP applications you'd like to install. ­or­ Click Select All to install all of the HP applications. Click Install Now. 24 Starting Out with Your OmniBook Restoring Files To read the online User's Guide If you want to save OmniBook disk space, you have the option of reading the online User's Guide directly from the Recovery CD. If you have an internal CD-ROM drive , install it in the OmniBook. ­or­ If you have a SCSI CD-ROM drive and a docking system CD-ROM drive to the docking system. ­or­ If you have a PCMCIA or parallel port CD-ROM drive , connect the PCMCIA or parallel port CD-ROM drive. See "To set up a PCMCIA or parallel port CD-ROM drive. " 2. Insert the Recovery CD in the CD-ROM drive. To read the Windows for Workgroups manual, double-click HPBOOK. EXE from \OMNIBOOK\MANUALS\WFW. To read the Windows 95 manual, double-click HPBOOK. EXE from \OMNIBOOK\MANUALS\WIN95. , connect the SCSI To install device drivers for other operating systems If you've installed a commercial version of Windows 95, Windows for Workgroups, or an alternate operating system, you'll need to manually install the required drivers. [. . . ] · When typing, try to find positions where you can sit with your arms (shoulder to elbow) straight down at your sides, and try not to hold your arms out away from your body (angle less than 20 degrees). · Position the keyboard so your wrists, hands, and fingers are in a "neutral" line while typing. This means they do not tilt up or sideways more than 10 degrees. · Shift positions and move your body from time to time--keeping your body "locked" in one position for a long period of time is unnatural and stressful. [. . . ]