User manual HP OMNIBOOK XE3L-GF

[. . . ] HP OmniBook XE3 Corporate Evaluator's Guide Notice This manual and any examples contained herein are provided "as is" and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein. Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations shall not apply to Consumer transactions in Australia and the United Kingdom and shall not affect the statutory rights of Consumers. [. . . ] The following procedure installs a retail version of Windows 2000. If you install a retail version of Windows 2000, you need to manually install the OmniBook specific drivers. This section describes how to: · · · · · · · · Prepare for software installation. Install a retail version of Windows 2000. Install video support for retail Windows 2000. Install audio and modem support for retail Windows 2000. Install integrated LAN support for retail windows 2000. Install TouchPad support for retail Windows 2000. Install Infrared support for retail Windows 2000. Install HP utilities. Requirements · · · OmniBook XE3 Windows 2000 CD-ROM OmniBook drivers for Windows 2000 Location: OmniBook hard drive and on the Recovery CD in \HP\DRIVERS\W2K To prepare for software installation HP recommends that you repartition and format your hard disk before installing retail Windows 2000. Follow the instructions below to partition your hard disk and create the hibernation partition. Insert the bootable Recovery CD-ROM in the CD-ROM drive. Boot the OmniBook, press ESC twice and select the CD-ROM/DVD as the boot device. Click "Continue" on the Recovery screen to enter the menu. 82 Corporate Evaluator's Guide Using Windows 2000 Installing Retail Windows 2000 4. Click "Advanced" on the Recovery CD-ROM menu. Choose the option "Do not load operating system" then choose "create FAT 16 partition" Or "create FAT 32 partition" and click Continue. Click OK to proceed with repartitioning. When message "Operation successful" appears on screen, press any key to shutdown the OmniBook. A diagnostic partition has now been created, and Hewlett-Packard's hardware diagnostics software has been placed on this partition. To use this hardware diagnostics software in the future, press F10 during boot of the system. To install a retail version of Windows 2000 1. Insert the Windows 2000 CD in the CD-ROM drive. Turn on the OmniBook, press ESC twice when you see the HP OmniBook logo and select the CD-ROM/DVD as the boot device. [. . . ] For more information, consult your dealer, an experienced radio/television technician, or the following booklet, prepared by the Federal Communications Commission: How to Identify and Resolve Radio-TV Interference Problems. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telephone number was (202) 512-1800. 156 Corporate Evaluator's Guide Specifications and Regulatory Information Regulatory Information Declaration of Conformity (U. S. A. ) Responsible Party: Hewlett-Packard Company Manager of Corporate Product Regulations 3000 Hanover Street Palo Alto, CA 94304, U. S. A. +1 (650) 857-1501 declares that the product Trade name: Product name: Model Number(s): Hewlett-Packard Company Notebook PC OmniBook XE3, Pavilion N5D series Notebook PC (D is any digit 0­9) complies with Part 15 of the FCC Rules. [. . . ]