User manual HP P1130 21 INCH CRT MONITOR

[. . . ] www. hp. com/go/monitorsupport hp 21-inch color monitor p4819a user's guide 0. 24 mm Aperture Grill Pitch Full scan screen that gives an edge-to-edge image F D Trinitron®, anti-reflective and anti-static screen coating Power: On/Off switch & LED Status Indicator Input Switch lets you connect two computers through Input 1 and Input 2 Brightness and Contrast controls for easy image adjustment User's Guide hp p1130 P4819A 21-inch Color Monitor (19. 8-inch Viewable Image) HP 21" Color Monitor User's Guide Notice Notice The information contained in the documents accompanying this product is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] 3 Press the / buttons to highlight and press the button again. The adjustment bar appears. 4 Use the / buttons to select the desired temperature. 22 EnglishEnglish HP 21" Color Monitor User's Guide Adjusting the color of the picture (COLOR) NOTE Lowering the temperature below 9300K may cause the whites to change from a bluish hue to red. VARIABLE mode 1 2 Press the button. Press the / buttons to highlight COLOR and press the button again. 3 Press the / buttons to highlight and press the button again. The adjustment bar appears. 4 Use the / buttons to adjust the color temperature. The new setting will be stored in memory. EXPERT mode You can make additional adjustments to the color in greater detail by selecting the EXPERT mode. 1 2 Press the Press the press the screen. / buttons to highlight COLOR and button again. The COLOR menu appears on the EnglishEnglish 23 HP 21" Color Monitor User's Guide Adjusting the color of the picture (COLOR) Press the / buttons to select the R (red), G (green) or B (blue) component of the input signal for both GAIN ( ) and BIAS ( ). 4 Press the / buttons to make the adjustment. 3 sRGB mode The sRGB color setting is an industry standard color space protocol designed to correlate the displayed and printed colors of sRGB compliant computer products. To adjust the colors to the sRGB profile, simply select sRGB mode in the COLOR menu of the OPTION menu. However, in order to display the sRGB colors correctly (=2. 2, 6500K), you must set your computer to the sRGB profile and adjust the brightness ( ) and contrast. For information on how to change the brightness ( ) and contrast, see page 16. NOTE Your computer and other connected products (such as a printer), must be sRGB compliant. Restoring the color from the EASY or sRGB menus The colors of most display monitors tend to gradually lose brilliance over several years of service. The COLOR RETURN feature found in the PRESET, VARIABLE and sRGB modes allows you to restore the color to the original factory quality levels. The explanation below explains how to restore the monitor's color from the PRESET menu. Press the / buttons to highlight COLOR and press the button again. 3 Press the / buttons to select COLOR RETURN and press the button again. 24 EnglishEnglish HP 21" Color Monitor User's Guide Adjusting the color of the picture (COLOR) NOTE Before using this feature, the monitor must be in normal operation mode (green power indicator on) for at least 30 minutes. If the monitor goes into power saving mode, you must return the monitor to normal operation mode and wait for 30 minutes for the monitor to be ready. You may need to adjust your computer's power saving settings to keep the monitor in normal operation mode for the full 30 minutes. [. . . ] Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. HP 21" Color Monitor User's Guide Regulatory Information Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco. se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www. tco-info. com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. [. . . ]