User manual HP PAVILION 8800

[. . . ] MSP3880-U MSP3880-W PCI 56K MODEM Users Manual Version 1. 2 PAN EUROPEAN APPROVAL REGULATORY NOTE The equipment has been approved under CTR21. For such product, the following statement is required : This equipment has been approved in accordance with Council Decision 98/482/EC for Pan European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance Dieses Geraet wurde gemaess der Entscheidung 98/482/EG des Rates europaweit zur Anschaltung als einzelne Endeinrichtung an das oeffentliche Fernsprechnetz zugelassen. [. . . ] Click Yes to continue. 6 Click Finish when installation is completed. This completes the installation of the modem drivers in Windows® 2000. Proceed to the next chapter to test your modem. 26 Chapter 4 Installing the Modem Drivers 4. 5 1. 4. For Windows NT® 4. 0 Start Windows NT ®. Place your Installation CD into the CD-ROM drive. From the Windows taskbar, click Start > Run. . . In the Run text box, type "D:\Winnt40\*\setup. exe" * For users of MSP3880-U, type U For users of MSP3880-W, type W Click OK. (Assuming your CD-ROM drive is D. If not, substitute drive letter accordingly) 5. 6. Click the Next button and select the Product Name from the Modem Board Installation Wizard. Follow any on-screen instructions to complete the software installation. This completes the installation of the modem drivers in Windows NT® 4. 0. Please proceed to the next chapter to test your modem. 27 Testing the Modem Card & Setting the Country This chapter contains information on how to test your modem card in Windows® Me/98/95/2000 & Windows NT® 4. 0. 5. 1 Windows® Me/98/95 (The following illustrations are based on the model MSP3880-W, in the Windows® 98 environment. ) 5. 1. 1 Testing the modem 28 From the Windows taskbar, click Start > Settings > Control Panel. 1 Chapter 5 Testing the Modem Card Double-click the Modems icon. 2 You will see the MSP3880 modem listed. Click on the Diagnostics tab. 3 29 Chapter 5 Testing the Modem Card Select the COM Port that your modem is connected to. Click More Info. . . 4 (The Port Information shown here may differ from what you see on your computer. It is determined by the COM Port which you connect your modem to) The More Info. . . window will appear, showing a list of AT commands. This indicates a successfullyinstalled modem. Click OK. 5 30 Chapter 5 Testing the Modem Card If your modem is not installed properly, the set of AT commands will not be listed. You may also be prompted by an error message, stating that it was unable to open the COM Port. If this happens, refer to the Appendix B - Troubleshooting Guide While testing the modem, the system gave an error message stating that it was unable to open the COM Port. 5. 1. 2 Setting the Country Ensure that the country setting is correct for your location. In some cases, the country is set to match the Operating System selected and re-selection is required to match your exact location. To change the current setting, do the following: Windows® Me 1. From the Windows taskbar, click Start> Settings>Control Panel. Double-click on the HSF Modem Region Select icon. Change it to the country that you are currently in and click OK. 31 Chapter 5 Testing the Modem Card Windows® 98/95 1. [. . . ] iv) Check whether there is any yellow exclamation mark (error) on the Modem/ Sound, video and game controllers devices. If yes, select the device, click Remove and OK. v) If the system still cannot detect the modem, you may wish to try using a different PCI slot instead. I have done a diagnostics test of my modem and there is nothing wrong with it. [. . . ]