User manual HP PAVILION 17-E049WM

[. . . ] Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Connect the AC adapter to the computer, and then plug it into an AC outlet. — ● If the power lights turn on, the AC adapter is working properly. If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to make sure the connections are secure. If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced. — Contact support for information on obtaining a replacement AC power adapter. HP CoolSense (select models only) HP CoolSense automatically detects when the computer is not in a stationary position and adjusts performance and fan settings to keep the surface temperature of your computer at the optimum level of comfort. When HP CoolSense is off, the position of the computer is not detected and the performance and fan options remain at the factory setting. As a result, the surface temperature of the computer may be higher than it would be with HP CoolSense on. To turn CoolSense off or on, follow these steps: ▲ From the Start screen, type cool, select Settings, and then select HP CoolSense. Refreshing your software content with Intel Smart Connect Technology (select models only) When the computer is in the Sleep state, Intel® Smart Connect Technology periodically causes the computer to exit Sleep. Smart Connect then updates the content for certain open applications. As a result, your work is immediately available to you as soon as you exit Sleep. You do not have to wait while updates are downloaded. –² To enable this feature or manually adjust the settings, from the Start screen, type smart, and then select Intel® Smart Connect Technology. HP CoolSense (select models only) 41 Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions: ● ● ● When you need to replace the battery or access components inside the computer When you are connecting an external hardware device that does not connect to a USB or video port When the computer will be unused and disconnected from external power for an extended period Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command: NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or Hibernation before shutdown is possible by briefly pressing the power button. Save your work and close all open programs. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the charms. Click Settings, click the Power icon, and then click Shut down. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● ● ● ● Press ctrl+alt+delete, click the Power icon, and then select Shut Down. [. . . ] Insert the HP Recovery media you created. Restart the computer, quickly press esc, and then press f9 for boot options. Select the optical drive or USB flash drive you want to boot from. Removing the HP Recovery partition HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. [. . . ]