User manual HP PAVILION DV9218EA SETUP UTILITY

[. . . ] 3 Using advanced Setup Utility features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Closing the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Setup Utility menus Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Navigation and selection are by keystroke. To choose a menu or a menu item, use the arrow keys. To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or f5 or f6. To close a text box or return to the menu display, press esc. To display additional navigation and selection information while the Setup Utility is open, press f1. 2 Chapter 2 Using the Setup Utility ENWW Displaying system information The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2. To start the Setup Utility, turn on or restart the computer, and then press f10 while "Press <F10> to enter setup" is displayed in the lower-left corner of the screen. Access the system information by using the Main menu. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. (The computer restarts in Windows. ) Restoring default settings in the Setup Utility The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. To start the Setup Utility, turn on or restart the computer, and then press f10 while "Press <F10> to enter setup" is displayed in the lower-left corner of the screen. Select Exit > Load Setup Defaults, and then press enter. When the Setup Confirmation is displayed, press enter to save your preferences. To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on the screen. The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the computer restarts. NOTE Your password, security, and language settings are not changed when you restore the factory default settings. ENWW Displaying system information 3 Using advanced Setup Utility features This guide describes the Setup Utility features recommended for all users. For more information about the Setup Utility features recommended for advanced users only, refer to Help and Support, which is accessible only when the computer is in Windows. The Setup Utility features available for advanced users include a hard drive self-test, a Network Service Boot, and settings for boot order preferences. [. . . ] Enter, change, or delete a power-on password. ENWW Main menu 5 System Configuration menu Select Language Support Enhanced SATA support (select models only) Boot Options To Do This Change the Setup Utility language. Set the following boot options: f10 and f12 Delay (sec. )Set the delay for the f10 and f12 functions of the Setup Utility in intervals of 5 seconds each (0. CD-ROM bootEnable/disable boot from CD-ROM. Floppy bootEnable/disable boot from Floppy. [. . . ]