User manual HP PCI EXPANSION BLADE C-CLASS PCI EXPANSION BLADE INSTALLATION INSTRUCTIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HP PCI EXPANSION BLADE. We hope that this HP PCI EXPANSION BLADE user guide will be useful to you.
Lastmanuals help download the user guide HP PCI EXPANSION BLADE.
Manual abstract: user guide HP PCI EXPANSION BLADE C-CLASS PCI EXPANSION BLADE INSTALLATION INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] HP c-Class PCI Expansion Blade
Overview
To install an HP c-Class PCI Expansion Blade: 1. Install and configure an HP BladeSystem c-Class enclosure. Install any PCI Expansion Blade PCI boards using one of the two included PCI connector boards. [. . . ] Before installing a PCIe expansion board, remove the PCI-X connector board and install the PCIe connector board. To install an expansion board into the PCI Expansion Blade: 1. Slide the hood toward the latch, and then lift the hood.
Device bay numbering
Refer to the following illustrations to determine which device bay to install the HP c-Class PCI Expansion Blade into.
Half-height device bay numbering
c7000 Enclosure:
2.
To install a PCIe expansion board, first remove the PCI-X connector board, then install the PCIe connector board. To install a PCI-X expansion board, omit this step. Remove the five screws from the PCI-X connector board, then pull the board straight up to remove it from the PCI Expansion Blade. Push the PCIe connector board straight down into the connector board slot, then install the five screws to secure it.
c3000 Enclosure:
Full-height device bay numbering
c7000 Enclosure:
·
Each adjacent pair of bays (bays 1 and 2, bays 3 and 4, bays 5 and 6, and so on) can be used for the PCI Expansion Blade and its associated server blade.
Installation guidelines for associating with a full-height server blade
When installing the PCI Expansion Blade with a full-height server blade, observe the following additional guidelines: · · Remove the device bay shelf. Install an HP PCIe Mezzanine Pass-Thru Card in the mezzanine connector 3 in the full-height server blade. See the documentation that ships with the mezzanine card and the server blade documentation. Install the coupler plate on the PCI Expansion Blade. Install the PCI Expansion Blade in bays 9 through 16 for the c7000 Enclosure, or bays 7 or 8 (using the mini divider that came with the enclosure) for the c3000 Enclosure.
· · c3000 Enclosure:
CAUTION: For c3000 Enclosures, only device bays 7 and 8 are mechanically supported for installation of the PCI Expansion Blade. Installing the PCI Expansion Blade in another bay could result in damage to the PCI Expansion Blade.
· If the PCI Expansion Blade is installed in an odd-numbered bay, then install the associated server blade in the adjacent even-numbered bay to the right of the PCI Expansion Blade (c7000 Enclosures) or above the PCI Expansion Blade (c3000 Enclosures).
NOTE: When a coupler plates is installed on the PCI Expansion Blade, a server blade can be installed above the PCI Expansion Blade.
Installation guidelines
Observe the following guidelines when installing the PCI Expansion Blade: · · One PCI Expansion Blade is associated with one partner server blade in an adjacent bay.
·
Power down the partner server blade before installing the PCI Expansion Blade. The Onboard Administrator configures the enclosure and the PCI Expansion Blade. To function with the PCI Expansion Blade, Onboard Administrator version 2. 00 or later is required.
If the PCI Expansion Blade is installed in an even-numbered bay, then install the associated server blade in the adjacent odd-numbered bay to the left of the PCI Expansion Blade (c7000 Enclosures) or below the PCI Expansion Blade (c3000 Enclosures). For c3000 Enclosures, if the PCI Expansion Blade is installed in bay 7, install the full-height server blade in bay 4. [. . . ] See the documentation that ships with the server blade. Check the Onboard Administrator and Insight Display to verify that the PCI Expansion Blade is properly associated with the adjacent server blade. A green Expansion Blade Status LED also indicates proper installation.
The installation is complete.
4.
Install the PCI Expansion Blade.
NOTE: The c7000 Enclosure is shown in the following illustrations. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP PCI EXPANSION BLADE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HP PCI EXPANSION BLADE will begin.
