User manual HP PHOTOSMART 2575XI

[. . . ] HP Photosmart 2570 All-in-One series User Guide HP Photosmart 2570 All-in-One series User Guide © Copyright 2005 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws. with, or arising out of the furnishing, performance, or use of this document and the program material which it describes. Note: Regulatory information can be found in the technical information chapter of this guide. 5. [. . . ] Paper Type Lets you select the paper type for the current print job. The Automatic setting lets the HP All-in-One detect and set the paper type automatically. When Paper Size and Paper Type are both set to Automatic, the HP All-in-One selects the best options for the current print job. The other Paper Type settings let you override the automatic settings. Lets you enable or disable automatic digital sharpening of photos. Smart Focus affects only printed photos. It does not change the appearance of photos on the color graphics display or the actual image file on the memory card. Lets you make dark photos appear lighter. Adaptive Lighting affects only printed photos. It does not change the appearance of photos on the color graphics display or the actual image file on the memory card. Adaptive Lighting is turned off by default. Lets you print the date and time or date only on top of each image. The date and time are determined by the EXIF tags that are stored when the image is captured or modified. The date and time will not appear on the color graphics display. It only appears on the photo when printed. Lets you enhance a video frame when printing. The enhancements are automatically made by your HP Allin-One. It does not change the appearance of video frames on the color graphics display or the actual video file. Use of this option might affect the amount of time it takes to print the selected video frames. Video Enhancement is turned off by default. Lets you save the current Print Options settings as the new defaults. 5. 6. Make the change to the setting, and then press OK. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that might cause undesired operation. Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, might cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]