User manual HP PHOTOSMART 318

[. . . ] hp photosmart 318 digital camera user guide Trademark and copyright information © Copyright 2001 Hewlett-Packard Company All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. The information contained in this document is subject to change without notice. Hewlett-Packard shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] When the countdown timer expires, the software begins unloading new images from the camera to the computer. To pause the automatic unload, click Pause. You can set up your HP Automatic Image Unload software so that certain tasks occur automatically after the images are unloaded from the camera. In the HP Automatic Image Unload window, click Options. When all the new images have been unloaded to your computer, the ArcSoft PhotoImpression software opens and you can view, edit, print, and create projects with your images. For more information, see the software's Help. Tips for unloading images to a Macintosh computer When you unload images to your computer, the images are still stored in the camera until you delete them. If you take new pictures and then unload images again, the automatic unload software ignores the old images. That way, you do not end up with many copies of the same image on your computer. If you have no new images in your camera when you connect it to the computer, the automatic unload does not take place. You can set up specific tasks to occur automatically after the images have been unloaded from the camera such as deleting images from the camera, printing the images, or putting the images into a photo album layout. To do this, click Options in the HP Automatic Image Unload window. 38 HP photosmart 318 User Guide In the HP Automatic Image Unload Options window, you can disable the automatic unload feature. To turn the feature on again, open the Automatic Image Unload Options file in the ArcSoft PhotoImpression folder. The automatic unload software stores your images in a folder called Macintosh HD:ArcSoft PI:Photos:date. You can change only the final folder (the date) in that path. Make sure you know where your images are stored on your computer's hard disk. By default, images are stored in the PhotoImpression folder, for example Macintosh HD:ArcSoft PI:Photos:2002. 07. 04. If you ever decide to delete the ArcSoft PI folder, you must first move your images to another folder. If you do not, your images will be deleted from the hard disk when you delete the PhotoImpression folder. Unloading images without using the software If you are away from home, you can unload images to a computer that does not have the HP Automatic Image Unload software installed on it. Note Make sure that the computer has a USB port and that its operating system is Windows 2000 or Windows Millennium Edition or later, or Macintosh OS 8. 6 or later. To unload images to a Windows or Macintosh computer 1 Change the camera's PC Connect Mode to Disk Drive. For more information, see "Changing the PC Connect Mode setting" on page 35. 2 Connect the camera to the Windows or Macintosh computer with the USB cable. The letters PC appear in the status LCD to indicate that the camera is connected to the computer. [. . . ] Otherwise, contact the store where you purchased the product. Or, visit www. hp. com/cpso-support/guide/psd/repairhelp. html for the nearest sales and service office. Service is free of charge during the warranty period. Beyond the warranty period, service will be charged. 68 HP photosmart 318 User Guide A Appendix A: Reference This appendix describes: the symbols on the status LCD. [. . . ]