User manual HP PHOTOSMART 715

[. . . ] hp photosmart 715 digital camera user guide Trademark and copyright information © Copyright 2001 Hewlett-Packard Company All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. The information contained in this document is subject to change without notice. Hewlett-Packard shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] Keep the HP photosmart 715 CD-ROM in the computer's CD-ROM drive and continue to the next section to install the bonus software. To install the bonus software 1 Double-click the Bonus folder icon. 2 Double-click the installer icon for Panorama Maker or PhotoFantasy. 3 Follow the instructions on the screen to install the software. 36 HP photosmart 715 user guide Connecting the camera to a Macintosh computer Note The camera uses a USB connection, so you do not need to turn the computer off when connecting or disconnecting the camera. To connect the camera to a Macintosh computer 1 Make sure that the camera is turned off. 2 Plug the smaller end of the USB cable (supplied) into the camera. 3 Plug the other end of the cable into any USB port on the computer. Note When the camera is connected to a computer, only the switch operates. The other camera buttons do not respond. Sharing and printing images 37 Unloading images to a Macintosh computer Unloading is the process of copying images from the CF memory card in the camera to a computer. You can unload images from your camera in two ways: automatically, or by mounting the camera as a disk drive. The automatic unload procedure is described below. Note To conserve battery power, use an HP-approved AC adapter (optional) when you are unloading images to a computer. To automatically unload images to a Macintosh computer 1 Connect the camera to your computer by using the USB cable. The status LCD displays PC to indicate the camera is connected to a computer. 3 If the welcome screen appears on your computer screen, click OK. 4 After a few seconds, the Automatic Image Unload window appears. When the countdown timer expires, the software begins unloading new images from the camera to the computer. To pause the automatic unload, click Pause. You can set up your Automatic Image Unload software so that certain tasks occur automatically after the images are unloaded from the camera. To gain access to these options, click Options. When all the new images have been unloaded to your computer, the ArcSoft PhotoImpression software opens and you can view, edit, print, and create projects with your images. For more information, see the ArcSoft software Help. 38 HP photosmart 715 user guide Tips for unloading images to a Macintosh computer When you unload images to your computer, the images continue to be stored on the CF memory card until you delete them. If you take new pictures and then unload images again, the automatic unload software ignores the old images. That way, you do not end up with many copies of the same image on your computer. If you have no new images in your camera when you connect it to the computer, the automatic unload does not take place. In the Options window, you can disable the automatic unload feature. [. . . ] HP will not alter form, fit or function of the product to make it operate in a country for which it was never intended to function for legal or regulatory reasons. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. Troubleshooting 61 9 EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU. Hardware repair services If you think your camera, ADF, or XPA needs repair, first call the Customer Support Center, which can help determine if service is required and direct you to a service site. [. . . ]