User manual HP PHOTOSMART E217

[. . . ] HP Photosmart E217 Digital Camera User's Manual Legal and notice information © Copyright 2005 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] The default Display Brightness setting is Medium. In the Setup Menu (page 65), select Display Brightness. In the Display Brightness sub-menu, highlight the brightness level you prefer for the Image Display. The new setting is applied to the Live View screen behind the menu so you can see the effect the setting will have on the display brightness. Press the button to save the setting and return to the Setup Menu. The new setting remains in effect until it is changed again, even when you turn the camera off. 66 HP Photosmart E217 User's Manual Camera Sounds Camera sounds are the sounds that the camera makes when you turn it on, press a button, or take a picture. Camera sounds are not the audio sounds recorded with images or video clips. The default Camera Sounds setting is On. In the Setup Menu (page 65), select Camera Sounds. In the Camera Sounds sub-menu, highlight Off or On. Press the button to save the setting and return to the Setup Menu. The new setting remains in effect until it is changed again, even when you turn the camera off. Using the Setup Menu 67 Date & Time This setting allows you to set the date/time format, as well as the current date and time for the camera. This is usually done when you first set up the camera; however, you may need to re-set the date and time when you are travelling to different time zones, after the camera has been without power for an extended time, or if the date or time is incorrect. The date/time format chosen will be used to display the date information in Playback. Also, the format chosen in this setting is what is used in the Date & Time Imprint feature (see Date & Time Imprint on page 42). In the Setup Menu (page 65), select Date & Time. In the Date & Time sub-menu, adjust the value of the highlighted selection by using the buttons. Press the buttons to move to the other selections. Repeat Steps 2 and 3 until the correct date/time format, date, and time are set. Press the button to save the setting and return to the Setup Menu. The date/time format setting remains in effect until it is changed again, even when you turn the camera off. The date and time settings also remain current as long as the camera batteries that are installed have a charge, or the batteries are removed for less than 10 minutes. [. . . ] To clean your camera, you will need lens-cleaning tissue and a soft, dry, lint-free cloth commonly available at photospecialty stores. You can also purchase these items in a camera-cleaning kit. NOTE: You should purchase lens-cleaning tissue that has not been chemically treated. Some chemically treated lens tissue can cause scratching of the lens and Image Display. Cleaning the Camera Lens Do the following to remove any fingerprints, dust, and so forth that have accumulated on the lens. [. . . ]