User manual HP PHOTOSMART 6220 QUICK START GUIDE

[. . . ] For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Part number: Q6220-xxxxxx Legal and notice information © Copyright 2006 Hewlett-Packard Development Company, L. P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Use only with the power adapter supplied by HP. 1 Welcome The HP Photosmart 6220 Digital Camera Dock allows you to easily download images to your computer, print images directly to a printer, and recharge the camera battery. IMPORTANT: More detailed information about your HP dock, including troubleshooting, safety information and regulatory information can be found in the electronic user guide on the CD that came with your camera. Setting Up the Dock One or more clear plastic dock inserts came in the box with your dock. Each of these dock inserts has a sticker of a different shape and color on it. See Chapter 1 of your camera electronic User Guide to determine which dock insert to use. 1. Attach the dock insert to the top of the camera dock by snapping it into place. Setting Up the Dock 1 2. Connect the AC power adapter and USB cable to the right-hand side of the dock. 1 Your dock uses the AC power adapter that came with your camera. Plug it into the 5V 2A connector and the wall. Mini USB port for connecting to a computer or printer. 1 2 2 3. Remove any cables that may be attached to your camera. Then, insert the camera into the camera dock as shown here. The Image Display side of the camera must point toward the edge of the dock with the HP logo. 2 Welcome 2 Transfer and Print Images You can use your dock to transfer images to a computer and to print them directly to a printer. Transferring Images to a Computer You can transfer images to your computer with or without using the HP Photosmart Software. Transferring Images using HP Photosmart Software 1. Connect the dock to the computer using the USB cable. Turn on the camera and follow the directions on your computer screen. Refer to the onscreen help for more information. Transferring Images without HP Photosmart Software 1. Set the camera's USB Configuration to either Digital Camera or Disk Drive. Refer to your camera electronic User Guide for more information. NOTE: If you are using Windows 98 or Me, you must install the software to transfer images. 2. Place the camera in the dock and turn it on. 3. [. . . ] If all the settings in the Print Setup menu look correct, press the Menu/OK button on the camera to begin printing. Or, you can change settings in the Print Setup menu using the arrow keys on the camera, then press Menu/OK to begin printing. NOTE: There is a print preview in the Print Setup screen showing the page layout that will be used for printing. [. . . ]