User manual HP PHOTOSMART C7180 BASICS GUIDE

[. . . ] HP Photosmart C7100 All-in-One series Basics Guide HP Photosmart C7100 All-in-One series Basics Guide © 2006 Hewlett-Packard Development Company, L. P. Adobe® and the Acrobat logo® are trademarks of Adobe Systems Incorporated. Windows®, Windows NT®, Windows ME®, Windows XP®, and Windows 2000® are U. S. registered trademarks of Microsoft Corporation. Intel® and Pentium® are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. [. . . ] Do not force paper too far forward in the input tray. Use paper types that are recommended for the HP All-in-One. Make a copy You can make quality copies from the control panel. To make a copy from the control panel 1. Make sure you have paper loaded in the input tray. Load your original print side down in the right front corner of the glass. 3. Press Start Copy Black or Start Copy Color to begin copying. Use the HP All-in-One features Scan an image You can start a scan from your computer or from the HP All-in-One. This section explains how to scan from the control panel of the HP All-in-One only. To use the scan features, the HP All-in-One and computer must be connected and turned on. The HP All-in-One software must also be installed and running on your computer prior to scanning. To verify that the HP All-in-One software is running on a Windows computer, look for the HP All-in-One icon in the system tray at the lower right side of the screen, near the time. Basics Guide 61 Chapter 4 Note Closing the HP Digital Imaging Monitor icon in the Windows system tray can cause the HP All-in-One to lose some of its scan functionality. If this happens, you can restore full functionality by restarting your computer or by starting the HP Photosmart Software. Scan an original to a computer You can scan originals placed on the glass by using the control panel. Load your original print side down in the right front corner of the glass. Press to highlight Scan to Computer, and then press OK. If the HP All-in-One is connected to one or more computers on a network, do the following: a. A list of the computers connected to the HP All-in-One appears on the display. Note The Select Computer menu might list computers with a USB connection in addition to those connected through the network. Press OK to select the default computer, or press to select a different computer, and then press OK. The Scan To menu appears on the display, listing the applications on the selected computer. If the HP All-in-One is connected directly to a computer with a USB cable, proceed to step 5. Press OK to select the default application to receive the scan, or press to select a different application, and then press OK. A preview image of the scan appears on your computer, where you can edit it. Make any edits to the preview image, and then click Accept when you are finished. b. 5. 6. Make reprints of your photos You can scan a printed copy of a photo to make reprints in a variety of sizes, up to the size of letter (8. 5 x 11 inch) or A4 (210 x 297 mm) paper. By default, the HP All-in-One is set to detect the type of paper you are using automatically. [. . . ] Up to 90-page memory (varies by model, based on ITU-T Test Image #1 at standard resolution). More complicated pages or higher resolution takes longer and uses more memory. Automatic busy redial up to five times (varies by model). Automatic no-answer redial one time (varies by model). [. . . ]