User manual HP PL5060N

[. . . ] The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. hP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] Use the remote control within a distance of 16. 4 feet (5 meters) from the front of the TV remote control sensor window and at the maximum horizontal and vertical angles of 30 degrees. Do not mix different types of batteries together (for example, alkaline and carbon-zinc) or old batteries with fresh ones. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. reversed batteries may cause damage to the device. When not using the remote for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. When you want to program a universal remote control to operate your HP TV, if HP is not listed in the supported brand codes, use a Philips TV code. the HP remote control transmits Philips-licensed remote control codes. After programming your universal remote control with a Philips TV code, it can operate your HP TV functions for: volume, mute, power, and input source. Do not try to recharge batteries that are not intended to be recharged; they can overheat and rupture. Follow the battery manufacturer's directions for the batteries you are using. Always remove batteries as soon as they become weak. Weak batteries can leak and severely damage the unit. The battery life depends on how much the remote control is used. replace batteries when remote control operation becomes erratic. Do not take apart the batteries, heat them, or throw them into a fire. Insert two AAA non-rechargeable batteries into the remote control, ensuring that you place them with the proper polarity. Press a direction arrow button to choose the option, then press OK. Press Menu again to exit the menu and return to your TV display. Press Back to go back one level when a menu is displayed. P I J Mute CC Press Mute to turn sound off or on. Press the number buttons (0­9) to directly select channels, and then press Enter. [. . . ] There is no picture or a blue screen, and I have an external device controlling the TV. Be sure that all connections are secure. Verify that the external device or PC power is turned on. Check to make sure each cable is plugged into the correct colorcoded connector on the TV conncectors and input source connectors. [. . . ]