User manual HP PROLIANT BL10E G2 SERVER

[. . . ] HP ProLiant BL e-Class Integrated Administrator User Guide May 2003 (Fourth Edition) Part Number 249070-004 © 2003 Hewlett-Packard Development Company, L. P. Microsoft® and Windows® are U. S. registered trademarks of Microsoft Corporation. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] This means the server blade could lose data or become unstable. If no server blade is in the specified bay, the user is told that the bay is empty. If no server blade is in the specified bay, the user is told that the bay is empty. The optional boot arguments require a BIOS version of 06/15/02 or greater of the ProLiant BL10e Server blade ROM. Adding an optional boot argument forces the blade to abandon the regular boot order and forces a boot using the specified method. Only enclosure and group administrators may execute this command. POWERON BAY <bay number> {[ , | - ] <bay number>} {[PXE | HDD | RBSU]} Only enclosure and group administrators may execute this command. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-21 Command Line Interface Table 4-6: Server Bay Management Commands continued Command Description Sends a request to the server blade to perform a graceful shutdown. If no server blade is in the specified bay, the user is told that the bay is empty. The optional boot arguments require a BIOS version of 06/15/02 or greater of the ProLiant BL10e Server blade ROM. Adding an optional boot argument forces the blade to abandon the regular boot order and forces a boot using the specified method. Restrictions Only enclosure and group administrators may execute this command. REBOOT BAY <bay number> {[ , | - ] <bay number>} {FORCE} {[PXE | HDD | RBSU]} SET BAY BOOT FIRST [HDD | PXE] <bay number> {[ , | - ] <bay number>} Sets the IPL for each subsequent reboot. This setting is only valid for present blades and is cleared if a blade is removed. This command requires BIOS version 06/15/02 or greater for the ProLiant BL10e server blade ROM. Only enclosures and administrators may execute this command. SET BAY BOOT ONCE [HDD | PXE | RBSU] <bay number> {[ , | - ] <bay number>} Sets the boot device to be used on the next boot of the bay(s) specified. This setting is only valid on present blades and is cleared if the blade is removed. This command requires BIOS version 06/15/02 or greater for the ProLiant BL10e server blade ROM. Only enclosure and administrators may execute this command. continued 4-22 HP ProLiant BL e-Class Integrated Administrator User Guide Command Line Interface Table 4-6: Server Bay Management Commands continued Command Description Turns a Unit Identification LED on the server blade on or off. Restrictions Only enclosure and group administrators may execute this command. Group members and group administrators only see information for the bays in their groups. SET BAY UID <bay number> {[ , | - ] <bay number>} [ON | OFF] SHOW BAY INFO [ALL | <bay number> {[ , | - ] <bay number>}] Displays the following fields: Assigned to group, type, name, installed operating system, part number, serial number, asset tag, BIOS version, all CPU types and associated maximum speeds, memory, NIC #1 MAC, and NIC #2 MAC. If no server is in the bay, the user is shown the assigned to group and the server blade type. SHOW BAY LIST [ALL | <group name>] Displays the assigned to group, remote console user, and server blade name for each bay in a particular group if a group name is specified or all bays if ALL is specified Displays the power (On or Off), assigned to group, remote console user, health (OK, CPU failure, or power module failure), thermal (OK, warm, degraded, or failed), and Unit Identification LED (On or Off) for the server blade. Group members and group administrators only see information for the bays in their groups. SHOW BAY STATUS [ALL | <bay number> {[ , | - ] <bay number>}] Group members and group administrators only see information for the bays in their groups. continued HP ProLiant BL e-Class Integrated Administrator User Guide 4-23 Command Line Interface Table 4-6: Server Bay Management Commands continued Command Description Displays the syslog of the specified blade with 22 lines per screen. Typing "q" quits the command; any other key shows the next screen if more information is available to display. The system log of the server blade is not stored between reboots, so the information only includes what has taken place since the last power on of the Integrated Administrator. Typing "c" continuously displays the System Log without page breaks. Restrictions Group members and group administrators only see information for the bays in their groups. SHOW SYSLOG BAY <bay number> UNASSIGN BAY [ALL | <bay number> {[ , | - ] <bay number>}] Removes the bay(s) from their assigned group. Only enclosure administrators may execute this command. 4-24 HP ProLiant BL e-Class Integrated Administrator User Guide Command Line Interface Command Line Event Messages Table 4-7: Command Line Event Messages Message User Event Messages User Permission Change One of the following has occurred: · · Possible Cause A user has been added, removed, or modified. A user's group membership has been modified. The server blade bay membership has been changed for a group with at least one user. Enclosure Event Messages Enclosure Shutdown Enclosure Status Change The enclosure is being shutdown. [. . . ] If so, log in again to use your new rights. If the problem continues, contact the enclosure administrator. When I ran "upload config, " garbage printed to the screen and then a statement printed saying the command completed successfully. My fans periodically increase speed and then return to their normal speed. [. . . ]