User manual HP PROLIANT DL100 G2 STORAGE SERVER PROLIANT DL100 G2 STORAGE SERVER RELEASE NOTES (5697-6494, MARCH 2007)

[. . . ] HP ProLiant DL100 G2 Storage Server release notes These release notes cover HP ProLiant DL100 G2 Storage Servers running editions of Microsoft® Windows Storage Server 2003 R2. Part number: 5697-6494 First edition: March 2007 Description These release notes cover HP ProLiant DL100 G2 Storage Servers running editions of Microsoft® Windows Storage Server 2003 R2. For storage servers running Windows Storage Server 2003 SP1 or lower, see the HP ProLiant release notes, part number 379129­401. Update recommendation Recommended Product models The following table identifies HP ProLiant Storage Servers that are capable of being upgraded to Windows Storage Server 2003 R2. [. . . ] This is because the action of opening a shared folder depends on the Windows shell, which is not running by default while connected through a web browser. Workaround Connect directly to the storage server or via Remote Desktop. Issue: The pie chart under HP Storage Server Management > Storage Management may indicate a larger amount of disk space than actually exists Description This issue may occur if both of the following are true: · A hard quota is set and enabled on the root folder of one or more volumes. · A volume with a hard quota on the root folder also has Single Instance Storage (SIS) enabled. This is due to an interoperability issue between directory quotas and SIS. Workaround Disable the hard quota on the root folder of the volume, or change the hard quota to be a soft quota. Issue: Adding multiple instances of the HP Storage Server Management snap-in to one console causes information to display incorrectly Description If multiple instances of the HP Storage Server Management snap-in are added to one console, all instances will reflect information about only the first server specified. Workaround Open a new MMC console for each instance of the snap-in. Issue: The Storage Server and Microsoft MMC quota plug-in fail when creating a new quota 4 HP Storage Server Management console user interface Description When creating a new quota using the HP Storage Server Management console, the creation may fail with the event log message: A File Server Resource Manager configuration file or import-export file is corrupted. If the corrupt file is a configuration file, it is required that the system or volume be restored from backup. If the file is an import-export file, export the items again and retry the operation without editing the file contents. Workaround If the volume has existing quotas, recover the volume from backup. If the volume does not have existing quotas, use an Administrator login to rename the <Drive Letter>:\System Volume Information\SRM\quota. xml file and try to create the quotas again. Recover from backup if the creation continues to fail. Issue: After installing a Multilingual User Interface (MUI), the HP Storage Server Management console might incorrectly display unsupported MMC snap-ins Description On the first reboot after installing a new MUI from the HP Localization Kit onto an HP ProLiant Storage Server, the HP Storage Server Management console might display the Data Protection and Clustered Gateway Management MMC snap-ins, which are not supported. Workaround There are two workarounds for this issue: · Reboot the server. Close the HP Storage Server Management console. Restart the HP Storage Server Management service. Reopen the HP Storage Server Management console. Additional applications and utilities This section provides additional information on using certain applications and utilities on the storage server. DL100 G2 Storage Server release notes 5 Additional applications and utilities Issue: JRE-dependent applications or web sites prompt for JVM installation, or it is not properly displayed Description Workaround A web site or application that is dependent on Java Virtual Machine (JVM) is not displayed properly with Internet Explorer. Uninstall the Java Runtime Environment (JRE) using the Control Panel and Add or Remove Programs. Reinstall the JRE from the c:\hpnas\components\JRE folder. Issue: VDS provider for MSA does not refresh after volume creation fails Description Creating a LUN and volume using the Create a New LUN wizard using Storage Manager for SAN results in the volume creation failing and displays a warning icon on the created volume in the Storage Manager for SAN user interface. [. . . ] This issue is seen in the Disk Management MMC snap-in. Workaround Open the Disk Management snap-in. Right-click on the foreign disk and select Import disk. Installation instructions To complete the configuration of storage servers, see the HP ProLiant DL100 G2 Storage Server User Guide. To upgrade a storage server to Windows Storage Server 2003 R2, see the HP ProLiant Windows Storage Server 2003 R2 upgrade guide. Effective date March 26, 2007 DL100 G2 Storage Server release notes 7 [. . . ]