User manual HP PROLIANT DL380 G3 PACKAGED CLUSTER WITH MSA500 RACKED IMPLEMENTING NOVELL NETWARE 6.5 ON PROLIANT SERVERS INTEGRATION NOTE

[. . . ] Implementing Novell NetWare 6. 5 on HP ProLiant servers integration note, 3rd edition Abstract. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Acronyms in text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction to Novell NetWare 6. 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Supported configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Determine if you want to allow unsupported drivers to be installed. HP recommends accepting the default option of No, because HP does not provide support for unsupported driver installations. 15. Select either a Default or Manual upgrade by clicking the radio button next to the desired choice. · · The Default upgrade automatically detects drivers and then upgrades the server to NetWare 6. 5 with default settings. The Manual upgrade lets you manually configure your drivers and the default settings used in the Default upgrade. NOTE HP recommends selecting Manual, as there is a driver that may need to be changed during the upgrade. 16. Select Next to begin the file copy. 15 17. After the file copy completes, the Components page displays, allowing you to choose any additional NetWare 6. 5 products for installation. To see a description of a product, place the cursor over the product name. NOTE Because you are performing an upgrade, several components are already selected. These are the components currently installed on the server. Leaving the installed components checked reinstalls the products. Unchecking an installed component does not uninstall the product. 18. Select Next, and review the Summary screen for accuracy of products to be installed. If you are satisfied with the products listed, select Copy Files. Otherwise, select Back and make any necessary changes. Do not remove the Product CD from the CD-ROM drive at this time. 19. The upgrade process copies files for a few minutes. When the file copy completes, the system 20. If you selected Default in step 16, skip to step 23. The device drivers are detected and you are presented with a screen or screens where you can modify these settings. · If you do not want to modify the settings: a. Press Enter. · If you want to modify the settings: a. Select Modify. NOTE For NetWare 6. 5, the base functionality in CPQACPI. PSM and CPQMPK. PSM has been incorporated into Novell's ACPIDRV. PSM. You may need to modify the existing loaded PSM in this step so that ACPIDRV. PSM will be loaded. CPQACPI. PSM and CPQMPK. PSM are not supported on NetWare 6. 5. [. . . ] For an updated list of ProLiant servers with iLO 2, refer to the Remote Management - Integrated Lights-Out Products Web page at the following URL: http://h18013. www1. hp. com/products/servers/management/remotemgmt. html Solution To enable the mouse and keyboard when using Remote Console or Virtual Media, upgrade to iLO 2 Firmware Version 1. 01 AND NetWare 6. 5 SP5, which are available at the following URLs: · iLO 2 Firmware Version 1. 01 (or later) To download, go to www. hp. com/support and select the country and language. · · · · · AND · NetWare 6. 5 Support Pack 5 (SP5), which contains an updated NetWare Universal Host Controller Interface (UHCI) driver. NetWare 6. 5 SP5 is available on the Novell web site at the following URL: http://support. novell. com/servlet/downloadfile?file=/sec/pub/nw65sp5. ex e/ Select the Download drivers and software (and firmware) radio button. Type the name of the server in the window and press ENTER. [. . . ]